Cable Management & SSD placement

Toggle sidebar Toggle sidebar
S

suppressthethoughts

Honorable
Jan 1, 2014
10
0
10,510
So, here is the picture of my case (Cooler Master N200) and cable management, and as you can see I've done just about as much as possible. Now, there is a hard drive cage that is detachable, and as I have only a single hard drive there is no need to have it in. I was thinking about adding in an SSD, and was not quite sure where to put it. There is a spot directly beneath the 3.5" bay where an SSD can be mounted, along with two spots on the back panel, however those are inaccessible due to cables. The spot under the hard drive doesn't look secure. What is my best course of action, in where to mount the HDD and SSD?
d423.jpg


http://imageshack.com/a/img22/3831/d423.jpg
 
Solution
manofchalk
If you really wanted, you could just hook up an SSD's cables and just peg it at the system and close the side panel. They don't vibrate or have any moving parts, whether it has a secure mount or not doesn't really matter.
I would get some double sided adhesive tape, and stick it to the underside of the 5.25" bays.
Sort by date Sort by votes
manofchalk

manofchalk

Glorious
May 11, 2012
12,914
3
48,960
If you really wanted, you could just hook up an SSD's cables and just peg it at the system and close the side panel. They don't vibrate or have any moving parts, whether it has a secure mount or not doesn't really matter.
I would get some double sided adhesive tape, and stick it to the underside of the 5.25" bays.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom