Only get about 50 mb/s write and 200/s Read on SSD

Regens

Honorable
Jan 8, 2014
2
0
10,510
I just got an all new PC, specs are as follows

Operating System
Windows 7 Professional 64-bit SP1
CPU
Intel Core i7 4820K @ 3.70GHz
Ivy Bridge-E 22nm Technology
RAM
16,0GB Dual-Channel DDR3 @ 800MHz (9-9-9-24)
Motherboard
ASUSTeK COMPUTER INC. P9X79 LE (LGA2011)
Graphics
S24B350 (1920x1080@60Hz)
3071MB NVIDIA GeForce GTX 780 (CardExpert Technology) 28 °C
Storage
111GB KINGSTON KINGSTON SV300S3 SCSI Disk Device (SSD)
3726GB Seagate ST4000DM ST4000DM000-1F21 SCSI Disk Device (SATA)

My problem is that my SSD isn't "working" like an SSD should, my boot time is between 40 - 60 seconds
My benchmark shows 173 mb/s read and 71 mb/s write

I have only installed windows on my SSD, pluss Steam and other small things, do note that the slow boot up was from scratch as well so nothing there.
I have tried most things I have found online, I made sure it is in ACHI mode
One thing I did notice is that it displays in Speccy as SCSI device, but I read that it shouldn't do much (I might be terribly wrong)
I hope that someone could help me with this, getting a bit frustrating
 

Regens

Honorable
Jan 8, 2014
2
0
10,510


Looked up on kingston website, their SSD doesn't require any software as it will autodownload, I have also tried to manually check for any new updates on my SATA controller and the SSD itself