- Nov 20, 2013
- 7
- 0
- 10,510
Hey guys i just overclocked my fx 8120 to 4,6ghz stabel. Then a few weeks later i want to go higher, so i raised the bus speed to 250 and lower the multiplayer, on 1,488v, the pc boots, then i run prime 95 to see if is stabel, so it wasnt stabel, i restarted to enter bios to lower the bus speed. I loverd it to 235, then restarted the pc and it comes the magic with black screen . I restat the cmos , but nothing new. Then i take it out the cpu to see if there is some unusual things on it. It seems find, i clean it well, and i put it into a new Mother board to see if there will work. But unfortunatley i got the same probelem with black screen. So ithink this is clear i fired my cpu. If there is some tips to reviv the cpu? sombody?
Facebook
Twitter
Instagram