does the M5A99FX pro R2.0 Support the Geforce 9800GT?

Toggle sidebar Toggle sidebar
F

fmetala84

Honorable
Dec 10, 2013
19
0
10,510
I just got my new AMD rig and am still waiting for my ASUS R9 280x to arrive
on the meantime I put my old graphics card on the 9800GT and the monitor keeps blinking
I connected everything as supposed to

any ideas
 
Solution
alexoiu
The CPU is supported then. Is the 8 pin power plug connected to the motherboard? If yes, then I suggest taking the board outside the case, reseating the CPU (checking for bent pins also), installing the stock CPU fan and starting the board (put it on its box) with only CPU and CPU fan installed. See if still red CPU led.
Sort by date Sort by votes
F

fmetala84

Honorable
Dec 10, 2013
19
0
10,510


I m using the FX 8350. the fan of the cpu is working fine
there is a red led tht remains red on the motherbord yes at the point of the motherboard where it says MEM OK!
 
Upvote 0 Downvote
F

fmetala84

Honorable
Dec 10, 2013
19
0
10,510


the PSU is the Corsair CX750
CPU FX8350
RAM: 2X 4GB Gskill 1600
GPU until the new one arrives Geforce 9800GT
 
Upvote 0 Downvote
F

fmetala84

Honorable
Dec 10, 2013
19
0
10,510


ok the last 4 digits are 2005 and i noticed the led that remains red is the cpu led
 
Upvote 0 Downvote
alexoiu

alexoiu

Titan
Nov 1, 2012
39,818
249
126,990
The CPU is supported then. Is the 8 pin power plug connected to the motherboard? If yes, then I suggest taking the board outside the case, reseating the CPU (checking for bent pins also), installing the stock CPU fan and starting the board (put it on its box) with only CPU and CPU fan installed. See if still red CPU led.
 
Upvote 0 Downvote
Solution
F

fmetala84

Honorable
Dec 10, 2013
19
0
10,510

ok I'll try this out thx for the advice

 
Upvote 0 Downvote
F

fmetala84

Honorable
Dec 10, 2013
19
0
10,510


ok sorry for the delay first of all
I took off the cpu heatsink along witht the cpu and i noticed there was some thermal pastre that was stuck on the site of
the cpu on the pins so i took a needle and slowly slowly i cleaned the pins
I then cleaned the cpu base and the heatsink base with pure alcohol. After that i added thermal paste in the dot fashioned way and now everything works marvelously!!!!!

Thank you very much for the help and the idications. I found them very helpful!! keeo up the good job!!
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom