New build doesn't work

paulieshore

Honorable
Jan 11, 2014
6
0
10,510
New build with all new parts. My build turns on then stops,and does this 3 times then the cpu fan goes full blast until it goes back down to idle, i don't get a signal to the monitor.
 
Solution
I suggest taking the board out of the case, reseating the CPU, checking the socket for bent pins and if OK, starting the board out of the case (for ruling out a short).

paulieshore

Honorable
Jan 11, 2014
6
0
10,510
Corsair CX Series 600 Watt
Intel Core i5-4430
ASROCK H81M-HDS
CORSAIR Vengeance Model CMZ8GX3M2A1600C9
Seagate Barracuda ST1000DM003

When i try to start it, it has 4 short beeps. I don't have gpu listed because I don't have it in currently just so it doesn't get in the way.
The beeps only happen after it is turned on and it waits until restart to do it again.
 

paulieshore

Honorable
Jan 11, 2014
6
0
10,510
CPU fan is connected. With the RAM taken out it does 3 long beeps continuously and it takes 2 times before the cpu fan continuously spins then goes to idle, and the first problem was that the first RAM stick wasn't working. With the one that works is hooked up it gives me 4 long beeps at post a start.