Sign in with
Sign up | Sign in
Your question
Solved

Expert electronics tech- Answering OC question

Last response: in Overclocking
Share
a b K Overclocking
January 15, 2014 2:10:05 AM

Good day,

My name is Matthew and I have my master cert in electronics.
Over the years I have overclocked every cpu I have ever owned. I understand all options and setting in the bios when it comes to overclocking.

I am new to tomshardware and wish to give advice if required :) 
January 15, 2014 2:13:34 AM

Good to have you aboard Matthew, hope to see you have a positive influence on the community.
m
0
l

Best solution

a c 235 K Overclocking
January 15, 2014 2:22:05 AM

Matt Bull said:
Good day,

My name is Matthew and I have my master cert in electronics.
Over the years I have overclocked every cpu I have ever owned. I understand all options and setting in the bios when it comes to overclocking.

I am new to tomshardware and wish to give advice if required :) 


Overclocking advice is always required here, just jump in and help and we'll see what you've got to offer.

Welcome to THF! :) 

Share
Related resources
a b K Overclocking
January 15, 2014 2:22:12 AM

thank you :)  I have often used tomshardware for advice and figured I like to give some back
m
0
l
January 15, 2014 2:24:01 AM

Let me give you a small piece of advice though. Look at your clock frequently, I have lost hours of potential sleep on this site (for a good cause) and I will probably loose them again.
m
0
l
a b K Overclocking
January 15, 2014 2:30:15 AM

I might make a utube video explaining how a transistor works and how frequency sets how fast a transistor opens and closes. then how the vcore enables the transistor at a given frequency.
It might give a greater understanding of how to setup voltages.
But for the mean time I will just give advice. Thank you again :) 
m
0
l
January 15, 2014 2:34:01 AM

Matt Bull said:
I might make a utube video explaining how a transistor works and how frequency sets how fast a transistor opens and closes. then how the vcore enables the transistor at a given frequency.
It might give a greater understanding of how to setup voltages.
But for the mean time I will just give advice. Thank you again :) 


Do you have a youtube channel setup already, because that is actually an interesting topic and considering the job i'm about to have with the Air Force I need to know as much as I can regarding any electronics or electric principle.
m
0
l
a c 235 K Overclocking
January 15, 2014 2:42:13 AM

Is this a sock puppet show? :) 

It's been a while since we had one.
m
0
l
January 15, 2014 2:44:19 AM

I like the way the guy above me thinks. Have a shooting star *===---___
m
0
l
a c 235 K Overclocking
January 15, 2014 2:48:50 AM

xroe said:
I like the way the guy above me thinks. Have a shooting star *===---___


That's what I thought! :pfff: 

You don't even know what I am referring to.

m
0
l
January 15, 2014 2:50:10 AM

4Ryan6 said:
xroe said:
I like the way the guy above me thinks. Have a shooting star *===---___


That's what I thought! :pfff: 



That's what you should think, that "ryan" fellow is a genius, same for matt. The xroe guy seems a bit off though, I can't imagine that bull horn to be comfortable at all.
m
0
l
a c 235 K Overclocking
January 15, 2014 2:55:49 AM

I just know that actions speak louder than words, and over time any help given here, will be thanked by those that have been helped, so just jump in there and help and we'll see what you got. :) 

m
0
l
a b K Overclocking
January 15, 2014 3:00:50 AM

lol all good :) 
m
0
l
a c 235 K Overclocking
January 15, 2014 3:01:59 AM

Matt Bull said:
I might make a utube video explaining how a transistor works and how frequency sets how fast a transistor opens and closes. then how the vcore enables the transistor at a given frequency.
It might give a greater understanding of how to setup voltages.
But for the mean time I will just give advice. Thank you again :) 


That would be fine for about 1% of the users here, unfortunately most do not concern themselves with the how it works, as the majority are after the quick overclocking fix and won't even take the time to read and explore overclocking guides written to help themselves.

But if you think that's a good first step, knock yourself out and please supply a link to it, as I would be interested in it.

However the majority here are after a quick fix regarding overclocking, and you will discover that for yourself after being here for some time.

m
0
l
a b K Overclocking
January 15, 2014 3:03:40 AM

I bealive you are right and would instead just like to help people out in these forums. I will not worry about the utube clip.
m
0
l
a c 235 K Overclocking
January 15, 2014 3:07:52 AM

Helping others is the very reason I joined Toms back in 2002. :) 
m
0
l
!