So im currently rocking my all time favorite case but its been feeling a lil old now that i dont need all this extra cooling and and monstrous internal fan management.
Right now im using my cooler master HAF X with a bitfenix white led 230mm? or 200mm? fan in the front as an intake. Ive cut up my VGA fan shroud or what have you to let the 2nd card have some air to breath, but im thinking of just lowing the bracket thing to give both cards better air flow(opinions?)
Im talking about the shroud thing with the 120mm fan mounting, not the vga bracket thing.
So thats 1 front intake pulling through the HDDs, above that is a mount i bought that allows me to smoothly mount a 120mm fan to pull more air in from the bottom 3 5.5" bay slots. Currently using my old school favorite cooler master excalibur fan.
So both those intakes push the air through to the shroud with another 120mm fan(CM Jetflo) which then takes the air right to the GPUs.
Above that is a rear 140mm exhaust, im still trying to figure out what 140mm i like best so atm its an Aero Cool Shark?
And above all that was have an h100i in push pull config with 4 cooler master jetflos.
Other than the side fan which is why im writing this thats, 2 front intakes, 1 internal "intake", 1 rear exhaust, 1 rad top exhaust, and a 200mm bitfenix exhaust above the rad(this is on the front half so hardly any interference with the push pull exhausting)
So since this is my first time experimenting with a non blower style cpu setup, im wondering what 140mm fans you guys like best, if you had to pick one that had an LED, and one that could be anything on the market what would it be?
Also what do you guys think of the bitfenix fans? Is it just me or do the 200m spectre pros feel like theyre not pushing enough air. I get that its a lot of volume and feels like less air and i hear its better cooling than say 2 140mms pushing the same cfm/static pressure or what have you, but should i be sticking with these spectre fans i have?
Since it feels like very little air i almost wanna try using the side fan as an exhaust since i have so much intake and was even considering rerouting cables and adding a fan for another intake where the cpu cover would be located....
What would you do with all these scenarios, what would you do instead? I know im crazy, but cmon be crazy with me XD
EDIT:
Sorry had to cut the post a lil short. Future plans for the build once its all perfect and shiny =D will be to use the nzxt kraken g10s to cool my 2 780s. But to comfortably do that i want a case with modular HDD bays. I have my eyes on the corsair 750d and nzxt swtich 810, i love both cases equally for different reasons. But i dislike being forced into nzxt fans, but it looks like i wont have to with the switch 810 by using all 140mm fans.
I also had my eye on that amazing phantek enthoo tower since i love their fans but man i just couldnt pull that off. On the other hand the nzxt phantom 630 also looked nice if you like those 200m fans of theirs
Right now im using my cooler master HAF X with a bitfenix white led 230mm? or 200mm? fan in the front as an intake. Ive cut up my VGA fan shroud or what have you to let the 2nd card have some air to breath, but im thinking of just lowing the bracket thing to give both cards better air flow(opinions?)
Im talking about the shroud thing with the 120mm fan mounting, not the vga bracket thing.
So thats 1 front intake pulling through the HDDs, above that is a mount i bought that allows me to smoothly mount a 120mm fan to pull more air in from the bottom 3 5.5" bay slots. Currently using my old school favorite cooler master excalibur fan.
So both those intakes push the air through to the shroud with another 120mm fan(CM Jetflo) which then takes the air right to the GPUs.
Above that is a rear 140mm exhaust, im still trying to figure out what 140mm i like best so atm its an Aero Cool Shark?
And above all that was have an h100i in push pull config with 4 cooler master jetflos.
Other than the side fan which is why im writing this thats, 2 front intakes, 1 internal "intake", 1 rear exhaust, 1 rad top exhaust, and a 200mm bitfenix exhaust above the rad(this is on the front half so hardly any interference with the push pull exhausting)
So since this is my first time experimenting with a non blower style cpu setup, im wondering what 140mm fans you guys like best, if you had to pick one that had an LED, and one that could be anything on the market what would it be?
Also what do you guys think of the bitfenix fans? Is it just me or do the 200m spectre pros feel like theyre not pushing enough air. I get that its a lot of volume and feels like less air and i hear its better cooling than say 2 140mms pushing the same cfm/static pressure or what have you, but should i be sticking with these spectre fans i have?
Since it feels like very little air i almost wanna try using the side fan as an exhaust since i have so much intake and was even considering rerouting cables and adding a fan for another intake where the cpu cover would be located....
What would you do with all these scenarios, what would you do instead? I know im crazy, but cmon be crazy with me XD
EDIT:
Sorry had to cut the post a lil short. Future plans for the build once its all perfect and shiny =D will be to use the nzxt kraken g10s to cool my 2 780s. But to comfortably do that i want a case with modular HDD bays. I have my eyes on the corsair 750d and nzxt swtich 810, i love both cases equally for different reasons. But i dislike being forced into nzxt fans, but it looks like i wont have to with the switch 810 by using all 140mm fans.
I also had my eye on that amazing phantek enthoo tower since i love their fans but man i just couldnt pull that off. On the other hand the nzxt phantom 630 also looked nice if you like those 200m fans of theirs