I'm working on my first build and am a little uncertain about some of these cable connections.
https://imageshack.com/i/1570maj
1. In this first image, what is that four pronged plug for on the right side? It's part of the case and I suspect it might be to power the fan control switch?
https://imageshack.com/i/0y6of0j
2. In this second pic, I plugged the 24 pin power cable in the on right side, but there's another ATX 12V power connector in the upper left corner. Do I to plug something into that if I'm already using the 24 pin cable?
https://imageshack.com/i/fkzgnzj
3. I installed a Noctua NF-A14 PWM 140mm fan in the front of the case but the connector has 4 prongs while all the case and MB connectors all have 3 prongs. It does fit with one prong not being used, but it seems a bit odd? Should I connect this to the case connector or to the motherboard PWM_Fan1 port? In the bottom center of the pic, I have it connected to the PWM_Fan1 port.
Thanks for the help!
https://imageshack.com/i/1570maj
1. In this first image, what is that four pronged plug for on the right side? It's part of the case and I suspect it might be to power the fan control switch?
https://imageshack.com/i/0y6of0j
2. In this second pic, I plugged the 24 pin power cable in the on right side, but there's another ATX 12V power connector in the upper left corner. Do I to plug something into that if I'm already using the 24 pin cable?
https://imageshack.com/i/fkzgnzj
3. I installed a Noctua NF-A14 PWM 140mm fan in the front of the case but the connector has 4 prongs while all the case and MB connectors all have 3 prongs. It does fit with one prong not being used, but it seems a bit odd? Should I connect this to the case connector or to the motherboard PWM_Fan1 port? In the bottom center of the pic, I have it connected to the PWM_Fan1 port.
Thanks for the help!
Facebook
Twitter
Instagram