Hello,
Gigabyte G1 Sniper M3
GTX 780ti Gigabyte (Not windforce version)
i7 2600k (3.4Ghz) @4.00Ghz
8gb 1600Mhz RAM (2x4gb)
Windows 7 64-bit
AX760W PSU
My question is, in my overclocking I reach a point where if I increase my overclock any more it starts to get artifacts and crashes.
However, my temperature isn't above 60 degrees and my voltage is 1.175 and I've got it set to a max of 1.250. I'm using OC Guru and I've set power to 106%, temperature to 95 degrees, my fan running max (it also crashes on auto setting), and then with the max voltage set to 1.200 (default) or 1.250 I can't up my overclock any further and I'm just wondering what I can do about this?
I've only added about 180Mhz on to my core clock when this happens and from what I'm reading online a lot of people have added a lot more than that without issues. Thanks!
Gigabyte G1 Sniper M3
GTX 780ti Gigabyte (Not windforce version)
i7 2600k (3.4Ghz) @4.00Ghz
8gb 1600Mhz RAM (2x4gb)
Windows 7 64-bit
AX760W PSU
My question is, in my overclocking I reach a point where if I increase my overclock any more it starts to get artifacts and crashes.
However, my temperature isn't above 60 degrees and my voltage is 1.175 and I've got it set to a max of 1.250. I'm using OC Guru and I've set power to 106%, temperature to 95 degrees, my fan running max (it also crashes on auto setting), and then with the max voltage set to 1.200 (default) or 1.250 I can't up my overclock any further and I'm just wondering what I can do about this?
I've only added about 180Mhz on to my core clock when this happens and from what I'm reading online a lot of people have added a lot more than that without issues. Thanks!