I just finished my first build and when I boot it I get no beep but the BIOS does come up and it recognizes my HDD, CPU and MB. On boot the debug light on the MB cycles through a some codes before settling on A2 for about 10 second and then going away.
Here's some pics so you can see my wiring. I checked and double checked all my connections and I believe they're correct.
https://imageshack.com/i/f5hz7rj
https://imageshack.com/i/n8izwfj
https://imageshack.com/i/fk0s2mj
My second issue is my monitor doesn't get any signal when I try to use the display port running from the monitor to the video card. But it automatically detects and works fine if I use HDMI or the white DVI cord.
My specs:
Fractal Define R4 Case
I7 4770K
ASRock Z87 Extreme4 MB
Asus GTX670 DCII
Hyper212 Evo
Samsung 250GB evo SSD
Corsair TX650M power supply
Asus PB278q 27" Monitor
Here's some pics so you can see my wiring. I checked and double checked all my connections and I believe they're correct.
https://imageshack.com/i/f5hz7rj
https://imageshack.com/i/n8izwfj
https://imageshack.com/i/fk0s2mj
My second issue is my monitor doesn't get any signal when I try to use the display port running from the monitor to the video card. But it automatically detects and works fine if I use HDMI or the white DVI cord.
My specs:
Fractal Define R4 Case
I7 4770K
ASRock Z87 Extreme4 MB
Asus GTX670 DCII
Hyper212 Evo
Samsung 250GB evo SSD
Corsair TX650M power supply
Asus PB278q 27" Monitor