So I got a new processor (the a10-6800K AMD) and installed it. The rig ran fine for a day or so. However, now it seems that the draw distance is universally lowered for all games. Thus I went back to the old processor but it changed nothing. I tested it on Battlefield 4, The Witcher 2, and Arma 3. It is not very noticeable in Battlefield 4 and Arma 3 but in Witcher 2 it seems that objects only ten feet away can't be seen until you are next to it, same with some NPCs. I updated the drivers on my GPU recently as well but I rolled them back to see if that may have been an issue. However the same problem presented as before. My processor is compatible with my motherboard, and the same problem is present with both processors, so I'm not sure what the problem is. Also, if it did not seem obvious, I have never had this happen since I got the new graphics card. I also went back to reset all the settings on the NVIDIA Control Panel and that did nothing.
Go to Settings - Draw Distance, and set it to High.
I already tried that and I didn't have that problem before now. No settings were changed between installing the new processor, yet all games showed the texture and objects popping in. Unless you are talking about settings I don't know about, then I don't think that is the problem.