Airflow, temperature, noise setup for my build

happymatei

Distinguished
Nov 24, 2009
133
0
18,680
Hi everyone!
I just recently made a new build after 8 years and i've read a bit on the forum and i came to the conclusion that i did it wrong.
I have a very old ATX case with the PSU on the top. No other fans.

Now have a High Power Element PLUS 500W PSU, a 7850, an i5 2390t, 3 HDDs, 2 x 4gb ddr3 1866 mhz.
I have read the guide on the site and it said having the PSU on top has only disadvantages.
http://1.grgs.ro/images/products/1/4/244945/full/coolbox-503-a04b6b2f80c2d37ceea6d28a60e468b2.jpg
Its like this.

So my questions are what do i do now? Buy a new case? New fans? Or am i just overreacting?
Budget would be minimal...
 
Solution
Your PSU first of all is LOW quality and should be replaced before it fails and ruins all of your other components. Corsair, Antec, XFX, Seasonic ONLY.

Second of all, your case is probably fine. Just add a front intake fan and a top or rear exhaust fan. Your computer doesn't have parts that will get too terrible hot.
Your PSU first of all is LOW quality and should be replaced before it fails and ruins all of your other components. Corsair, Antec, XFX, Seasonic ONLY.

Second of all, your case is probably fine. Just add a front intake fan and a top or rear exhaust fan. Your computer doesn't have parts that will get too terrible hot.
 
Solution