I bought this Z87 back in December, so it's fairly new. It stated beeping 6 times, but then after that would boot. Now it doesn't boot. It just turns on, beeps 6 times, then shuts off, beeps 6 times, shuts off and repeats that. I looked at the manual and all it says is some bull**** about UEFI BIOS and fat1lity's life story, which I couldn't give a **** about. Nothing about what the beeps mean.
I tried pulling the graphics card out, trying different RAM modules, unplugging the SATA connections. Nothing I do will get this beeping to stop. I noticed people talking about a "Dr. Debug" something, but I don't see anything on the motherboard's PCB that says anything about debug. There is a RED LED that comes on next to the BIOS jumper. The only thing printed on it is BIOS_LED_1, which is actually printed twice. There's two LEDs on the board and one to the left of it also says BIOS_LED_1. If I pull the jumper off, it doesn't come on at all. If I put it in CMOS reset, the fans come on and nothing happens. If I put it in to normal mode, it beeps.
Is this something I should call their tech support about? Or, can I fix this on my own.
[Mod edits --- bad language removed]
I tried pulling the graphics card out, trying different RAM modules, unplugging the SATA connections. Nothing I do will get this beeping to stop. I noticed people talking about a "Dr. Debug" something, but I don't see anything on the motherboard's PCB that says anything about debug. There is a RED LED that comes on next to the BIOS jumper. The only thing printed on it is BIOS_LED_1, which is actually printed twice. There's two LEDs on the board and one to the left of it also says BIOS_LED_1. If I pull the jumper off, it doesn't come on at all. If I put it in CMOS reset, the fans come on and nothing happens. If I put it in to normal mode, it beeps.
Is this something I should call their tech support about? Or, can I fix this on my own.
[Mod edits --- bad language removed]