Sign in with
Sign up | Sign in
Your question

Phantom 410 the fourth prong on the Fan Control > PSU connecter fell out

Tags:
  • Fan Controller
  • Cases
  • Phantom 410
  • Components
  • Power Supplies
Last response: in Components
Share
January 20, 2014 11:39:46 AM

On my custom build in a Phantom 410 case the fourth prong on the fan control to Psu connector has popped out of it's housing. I have tried to push it back to where it was but it still seems to be loose. I push it back in and connect the cable to my modular PSU, but the LEDs in the case are no longer lighting up.The fans are running fine but with this case the power to the fans and LEDs run off the same cable.

Also the computer is randomly shutting off triggering Asus anti-surge sometimes and other times with no warning screen. 1 out of every 10 shutdowns or so it sounds like one of the fans randomly speeds up making a hair dryer type noise. With my limited knowledge what I believe to be happening is the pin is popping in and out of the connector to the modular PSU and causing my shut down issues. I feel like a year old Corsair 750 watt PSU shouldn't just be failing on me, and it has plenty of wattage for my build so it's not like I'm running even close to 750 watts. Would like a second opinion and what I can do about the lose pin on the fan control to PSU connector.

Thank you.

More about : phantom 410 fourth prong fan control psu connecter fell

a c 2489 ) Power supply
January 20, 2014 2:22:23 PM

If it's a CX750 it's a cheap power supply with poor capacitors.
m
0
l
January 20, 2014 2:42:23 PM

SR-71 Blackbird said:
If it's a CX750 it's a cheap power supply with poor capacitors.


It's an HX750
m
0
l
!