Sign in with
Sign up | Sign in
Your question

will a 170mm high heat sink fit into a NZXT G 921 RB 001 BL case?

Tags:
  • Overclocking
  • Cases
  • Spirit
Last response: in Overclocking
Share
January 21, 2014 2:27:01 AM

I am thinking about changing an order from a True Spirit 120 to the 140 model but not sure if I can fit the extra 25mm of height into the case. does anyone know if it will slip in there? the height of the True Spirit 140 is 170mm. they are currently the same price at the place I am looking to purchase from and would like the extra cooling if I can squeeze it in.

the case dimensions state its 8.11 inches but I know there are sometimes variables such as the mounting placement for the mother board is sometimes more or less.

More about : 170mm high heat sink fit nzxt 921 001 case

January 21, 2014 4:33:10 AM

is there a way to squeeze out .6 mm? O.o .... that's about 6 sheets of standard notebook paper.

I would hate to be done in with measurements so close lol.
m
0
l
Related resources
January 21, 2014 5:34:19 AM

hit the inside of the case with a hammer to make a dent where the cpu cooler would be? (inside of the side so the dent goes from inside to outside)
m
0
l
January 21, 2014 7:34:52 AM

the G 921 RB has a see through panel and I would be worried about breaking the plastic :p 
m
0
l
January 21, 2014 9:06:21 AM

going to go with the True Spirit 120. something I know that fits. thank you all for the opinions and options. might figure out later how to get another 140 mm set up that will work for the plans.
m
0
l
!