So i started my overclocking.
My current Freq is 3.6 Ghz
Memory is at 1866 with CAS of 9 10 9 28 G. Skill Ripjaws X 1866 2x4gb
My bus speed is at 234
My Ratio is at 15.5
My voltage is at 1.4
My NB Freq and Volt is at auto.
With this setting i can run Prime 95
With temps of 64c max.
24 hours no problems.
But when i increase my settings to
Freq is 3.7 Ghz
Memory is at 1870+ with CAS of 9 10 9 28 G. Skill Ripjaws X 1866 2x4gb
My bus speed is at 234
My Ratio is at 16
My voltage is at 1.45
My NB Freq and Volt is at auto.
It wont last a more than an hour on Prime 95.
Temps reach 70c Max.
My Cooler is CM TPC 812
My Board is Crosshair V Formula Z
PSU is Cougar 550w.
Any ideas how i can make 3.7 stable or even higher? Do i have to sacrifice my Memory freq in order to attain higher CPU freq without higher temps?
TYIA.
My current Freq is 3.6 Ghz
Memory is at 1866 with CAS of 9 10 9 28 G. Skill Ripjaws X 1866 2x4gb
My bus speed is at 234
My Ratio is at 15.5
My voltage is at 1.4
My NB Freq and Volt is at auto.
With this setting i can run Prime 95
With temps of 64c max.
24 hours no problems.
But when i increase my settings to
Freq is 3.7 Ghz
Memory is at 1870+ with CAS of 9 10 9 28 G. Skill Ripjaws X 1866 2x4gb
My bus speed is at 234
My Ratio is at 16
My voltage is at 1.45
My NB Freq and Volt is at auto.
It wont last a more than an hour on Prime 95.
Temps reach 70c Max.
My Cooler is CM TPC 812
My Board is Crosshair V Formula Z
PSU is Cougar 550w.
Any ideas how i can make 3.7 stable or even higher? Do i have to sacrifice my Memory freq in order to attain higher CPU freq without higher temps?
TYIA.