Corsair 750D motherboard install

Toggle sidebar Toggle sidebar
ImGeil

ImGeil

Honorable
Oct 21, 2013
60
0
10,630
I'm building my gaming rig and I went to install my MSI Z87-G43, but it won't fit in the motherboard tray. There is the giant standoff (pre installed) sticking up. Am I supposed to remove it because it is very difficult for me to align my motherboard with it in there.
 
Solution
clutchc
That case, like several others, has one standoff replaced with a guide pin. That pin is used to center the MB after placing it into the I/O shield openings for easy insertion of the other screws into their standoffs. (you did screw in the other standoffs, didn't you?) The MB is a standard 9 hole ATX with standard hole pattern. Unless the case was poorly manufactured, there should be no reason the MB won't fit easily.
Sort by date Sort by votes
clutchc

clutchc

Titan
Ambassador
Apr 22, 2009
43,150
411
131,790
That case, like several others, has one standoff replaced with a guide pin. That pin is used to center the MB after placing it into the I/O shield openings for easy insertion of the other screws into their standoffs. (you did screw in the other standoffs, didn't you?) The MB is a standard 9 hole ATX with standard hole pattern. Unless the case was poorly manufactured, there should be no reason the MB won't fit easily.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom