New build no display no beeps

Kodakiller

Honorable
Jan 21, 2014
4
0
10,510
I built a new computer from the October build 2013 by Austin Evans. I have everything in the right spots and when I power it on it runs good. But there is no display on the monitor. I tried many solutions on here like reinstalling ram and gpu but nothing seems to work. Please help
 
Solution
RMA = Return merchandise authorization. In simple terms exchange the CPU with a new one from vendor/retailer.

If you are sure than 1 pin is missing, then RMA will be the only option left.

And if you have another system try your other components there, just to make sure they are in fine condition, but the CPU. Good luck.

Kodakiller

Honorable
Jan 21, 2014
4
0
10,510
AMD Athlon X4 750K CPU
MSI FM2-A75MA-E35 Motherboard
2GB Gigabyte Radeon R9 270X Graphics Card
8GB Corsair Vengeance DDR3 RAM
1TB Western Digital Caviar Black Hard Drive
500W Corsair CX500 Power Supply
Rosewill Line-M Case

i have checked everything then i checked the processor and it had bent pins im not completely sure if that is the problem though.
 

Kodakiller

Honorable
Jan 21, 2014
4
0
10,510
i tried to reset the pins but it didn't fix the problem since i saw 1 was missing.
could you explain what rma the cpu is.
also there is no problem with the screen, ram, or graphics card or the power since everything turns on and runs fine except for the display on monitor it just says going to sleep mode if i have computer on and turn on my monitor. then it just sits there with black screen.
 
RMA = Return merchandise authorization. In simple terms exchange the CPU with a new one from vendor/retailer.

If you are sure than 1 pin is missing, then RMA will be the only option left.

And if you have another system try your other components there, just to make sure they are in fine condition, but the CPU. Good luck.
 
Solution