Sign in with
Sign up | Sign in
Your question
Solved

Changed Video Card, No signal to monitor (Please Help)

Tags:
  • Graphics
  • Graphics Cards
  • Monitors
Last response: in Graphics & Displays
Share
January 22, 2014 11:43:17 AM

Hello and Thanks for Reading this. I have an Alienware Aurora desktop (the 2012-ish model) and I wanted to replace the Nvidia Geforce GTX 555 Graphics card in it with an Asus Radeon R9 270. I uninstalled all of the Nvidia drivers and I powered it down completely and replaced the card and plugged in the 6 pin power plug into the card and hooked up the HDMI cable from my monitor into the card (which as always worked fine with my old video card) and the GPU is getting power; the fan and the lights are on, but there is no signal to my monitor. I tried resetting the BIOS by using the pin connection/CMOS battery reset but there is still no signal.

I put the old video card back in and it works fine, but the monitor doesn't pick up my new video card. *Note I can only get to BIOS with my old video card installed, should I change the settings then? Any help appreciated!

*Quick edit: When I power on my pc with my new card there are no beeps at all

More about : changed video card signal monitor

a b U Graphics card
January 22, 2014 11:48:02 AM

Find out how many watts your power supply is. Also make sure all the pins necessary are plugged into your graphics card.
m
0
l
a c 121 U Graphics card
a b C Monitor
January 22, 2014 12:07:47 PM

1. Can you hear the post beeps with your old card now ?

2. What is the make/model of PSU ? I assume its OEM, can you tell me the wattage and Amperage on +12V rail !

3. In most cases on branded PC's the MB BIOS is locked to do an upgrade of after market GPU's, this may have been the case with you. You could talk to PC vendor or could look for the GPU support list on vendors site.

4. Sometimes a MB BIOS update helps to recognize the after market GPU/s. You can try that at your own risk, cause there is no guarantee of it to work, unless the vendor say so, and potentially dangerous as that could brick the MB.

Good luck.
m
0
l
Related resources
January 22, 2014 12:08:37 PM

Xexoxix said:
Find out how many watts your power supply is. Also make sure all the pins necessary are plugged into your graphics card.

It's 825w and the minimum requirement for my new card is 500w. I checked the power cables and the one being plugged into the card, it's plugged in well enough. The GPU appears to be on, could it still be a power problem?
m
0
l
a b U Graphics card
January 22, 2014 12:10:31 PM

xCJJx said:
Xexoxix said:
Find out how many watts your power supply is. Also make sure all the pins necessary are plugged into your graphics card.

It's 825w and the minimum requirement for my new card is 500w. I checked the power cables and the one being plugged into the card, it's plugged in well enough. The GPU appears to be on, could it still be a power problem?

What is the model of your PSU? Also, put in your old video card, install drivers for your new gpu, and install the new GPU. Sometimes there are monitor drivers (which is weird, I know, but windows made me update mine once) so you can also check for those.
m
0
l
January 22, 2014 12:11:14 PM

lonewolf7 said:
1. Can you hear the post beeps with your old card now ?

2. What is the make/model of PSU ? I assume its OEM, can you tell me the wattage and Amperage on +12V rail !

3. In most cases on branded PC's the MB BIOS is locked to do an upgrade of after market GPU's, this may have been the case with you. You could talk to PC vendor or could look for the GPU support list on vendors site.

4. Sometimes a MB BIOS update helps to recognize the after market GPU/s. You can try that at your own risk, cause there is no guarantee of it to work, unless the vendor say so, and potentially dangerous as that could brick the MB.

Good luck.

well I've heard of people fixing similar problems by completely replacing their mobo, but I don't think that's possible for me to do right now, How would I go about updating the BIOS?
m
0
l
a b U Graphics card
January 22, 2014 12:12:40 PM

xCJJx said:
lonewolf7 said:
1. Can you hear the post beeps with your old card now ?

2. What is the make/model of PSU ? I assume its OEM, can you tell me the wattage and Amperage on +12V rail !

3. In most cases on branded PC's the MB BIOS is locked to do an upgrade of after market GPU's, this may have been the case with you. You could talk to PC vendor or could look for the GPU support list on vendors site.

4. Sometimes a MB BIOS update helps to recognize the after market GPU/s. You can try that at your own risk, cause there is no guarantee of it to work, unless the vendor say so, and potentially dangerous as that could brick the MB.

Good luck.

well I've heard of people fixing similar problems by completely replacing their mobo, but I don't think that's possible for me to do right now, How would I go about updating the BIOS?


Find out the make and model of your motherboard, go to the official product website for it, and there should be options to download the BIOS.
m
0
l
January 22, 2014 12:18:23 PM

Xexoxix said:
xCJJx said:
Xexoxix said:
Find out how many watts your power supply is. Also make sure all the pins necessary are plugged into your graphics card.

It's 825w and the minimum requirement for my new card is 500w. I checked the power cables and the one being plugged into the card, it's plugged in well enough. The GPU appears to be on, could it still be a power problem?

What is the model of your PSU? Also, put in your old video card, install drivers for your new gpu, and install the new GPU. Sometimes there are monitor drivers (which is weird, I know, but windows made me update mine once) so you can also check for those.


I'm not sure how to determine the model of the PCU :Z I can't find it, But I did think of installing the new drivers on my old vid card, I'll definitely try that out
m
0
l

Best solution

a b U Graphics card
January 22, 2014 12:20:53 PM

xCJJx said:
Xexoxix said:
xCJJx said:
Xexoxix said:
Find out how many watts your power supply is. Also make sure all the pins necessary are plugged into your graphics card.

It's 825w and the minimum requirement for my new card is 500w. I checked the power cables and the one being plugged into the card, it's plugged in well enough. The GPU appears to be on, could it still be a power problem?

What is the model of your PSU? Also, put in your old video card, install drivers for your new gpu, and install the new GPU. Sometimes there are monitor drivers (which is weird, I know, but windows made me update mine once) so you can also check for those.


I'm not sure how to determine the model of the PCU :Z I can't find it, But I did think of installing the new drivers on my old vid card, I'll definitely try that out


Good luck! To find the model, just open up your case and the brand at least should be on the side. Or where you plug your computer into the wall there should be a brand for the PSU.
Share
a c 121 U Graphics card
a b C Monitor
January 23, 2014 10:08:24 AM

xCJJx said:
12507360,0,1315300 said:
Well I've heard of people fixing similar problems by completely replacing their mobo, but I don't think that's possible for me to do right now, How would I go about updating the BIOS?
said:


You can find the BIOS update file on the PC vendors site, possibly under download section.

R9 270 is a 150W card on max load, so I think power is not the issue but something else. So talk to the PC vendor, they are the best ones to help you out.

m
0
l
!