Hello, I'm kinda new here.
Just wanted to ask if what might gone wrong with my install.
To begin with, I have 3 physical drives.
2x 60GB Phoenix Pro SSD and 1x500Gb Seagate HDD. Before, I was booting on my 500gb HDD with W8 installed in it. Then my SSD just came I have installed W8 on it, configured RAID0, leaving my other 500gb HDD untouched.
Installation went through. As well as the chipset, LAN, Audio and GPU drivers but the problem still insists. My LAN icon on the status bar shows and X mark and when I'm trying to diagnose it using windows troubleshooting wizzrd, it just tells me that the cable is unplugged.
I booted again on my 500gb HDD, with LAN cable untounched, I have internet connection on it.
So to sum it up.
Boot 500Gb HDD = LAN ok
No LAN 2x60Gb SSD = No LAN
I wonder if there is a setting on BIOS/UEFI menu that disables/enables lan on a RAID setup.
Sorry for my poor english.
Help me up on this one guys, Thanks!
Just wanted to ask if what might gone wrong with my install.
To begin with, I have 3 physical drives.
2x 60GB Phoenix Pro SSD and 1x500Gb Seagate HDD. Before, I was booting on my 500gb HDD with W8 installed in it. Then my SSD just came I have installed W8 on it, configured RAID0, leaving my other 500gb HDD untouched.
Installation went through. As well as the chipset, LAN, Audio and GPU drivers but the problem still insists. My LAN icon on the status bar shows and X mark and when I'm trying to diagnose it using windows troubleshooting wizzrd, it just tells me that the cable is unplugged.
I booted again on my 500gb HDD, with LAN cable untounched, I have internet connection on it.
So to sum it up.
Boot 500Gb HDD = LAN ok
No LAN 2x60Gb SSD = No LAN
I wonder if there is a setting on BIOS/UEFI menu that disables/enables lan on a RAID setup.
Sorry for my poor english.
Help me up on this one guys, Thanks!