Solved

how to connect dlink n150 600 router to reliance broadband

how to connect dlink n150 600 router to reliance broadband?? i tried all d steps but no output..As soon as i connect my router, the LAN settin gets lost n it shows Limited or NO Connectivity...wat exactly do i do now...Pls help...without router my modem works fine n good..HELP
5 answers Last reply Best Answer
More about connect dlink n150 600 router reliance broadband
  1. First of all you need to connect to the router using web browser and using http:\\192.168.1.1 or other, if you have router manual address should be described there. Default login and password is admin/admin.
    User guide for the router is your help, if it still wont help then probably a call to the ISP service center will be a solution, they tell you what to set up

    I don't have knowledge what kind of connection your ISP uses but over ADSL there are different standards like PPPoE or PPPoa also there can be a login/password authentication.
    Some of this information could be provided with the agreement papers during the first installation of the Internet if you miss that then for sure a call to the ISP will help.
  2. "First of all you need to connect to the router using web browser and using http:\\192.168.1.1 or other, if you have router manual address should be described there. Default login and password is admin/admin."
    this step doesnt come.. it says no page found..reload the page..if i remove router the my internet works fine with the modem....HELP
  3. Do you have a user guide for the router? Connect the router with a PC using LAN cable, if you tried Wifi it wont work since most of the routers are blocking wireless access. I've checked again and DLINK seems to use http:\\192.168.0.1 for its routers.
  4. it has steps..it says 2 connect 2 192.168.0.1 but it never connects..as soon as i connect,it shows LIMITED OR NO CONNECTIVELY
  5. Best answer
    Oh man you are speaking with no sense:
    1) connect PC with the router nothing more using LAN cable, no wifi nothine else.
    On the router LAN port LED diode should be flashing so you are connected.
    2) Start internet explorer put http://192.168.0.1 there should show up some login page after that you get to menu like that:
    http://support.dlink.com/emulators/dir655/121/WAN.html
    Its Setup/Internet section in menu.
    4) Connect the internet cord.
    5) Choose "My Internet Connection is", choose the correct mode for your ISP, if you don't know this, you need to call the ISP care center or whatever its called. If your modem is locked with the MAC adress, write the adress from the bottom of the modem to the MAC cloning section.
    5) Done.

    On which step you fail?
Ask a new question

Read More

Broadband Routers D-Link Wireless Network Connection