Hello everyone!
I just finished to build my new PC based on a i7 4770k Processor and an Asus Z87-DELUXE motherboard.
I don't overclock but I keep getting the error since the computer was born (the first time when I got this error was his second power on when I finished to build the system).
The error is:
"CPU Temperature Error - Press F1 to run setup" -
IMAGE attached:
IMAGE
I tried several thing:
a) Changed the OS from Win 8 to Win 7
b) removed the stock i7 CPU Cooler and buyed a new one: Cooler Master Hyper TX3 EVO - same error
c) tried 3 diferent cooling pastes (Intel stock paste and 2 Cooler Master pastes)
c) Updated the BIOS to last one (from Dec 2013)
I can delete this error only:
1) if remove the CPU cooler and replace it back
2) if I remove the Motherboard battery...
3) only if I ignore the temperature in the BIOS.. (but I really want to monitor the temperature in BIOS !)
IMAGE
Every piece of the computer is new, and the problem is strange..
Real Temp 3.70 shows a minimum of 28 Celsius Degree and a maximum of 64 Celsius for the CPU...
IMAGE
The error is very annoying because i want to keep the bios CPU temperature to be monitored...
Right now, the only thing I can to to enter Windows is to ignore the bios temperature or remove the mobo battery or removal of CPU cooler - any of each procedure will remove temporary the error...
It is the mobo temperature faulty ?
What else should I try ?
The specs are:
Motherboard: Asus Z87-Deluxe
CPU: Intel Core i7-4770K Quad-Core 3.5 GHZ 8 MB Cache BX80646I74770K
Memory: Corsair Vengeance 16GB (2 x 8GB) DDR3 1600 MHz (PC3 12800) CML16GX3M2A1600C9
SSD for OS: Samsung Electronics 840 EVO-Series 250GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE250BW
HDD: Seagate Barracuda 3 TB HDD SATA 6 Gb/s NCQ 64MB Cache 7200 RPM 3.5-Inch Internal Bare Drive ST3000DM001
Case: Cooler Master Silencio 650 Pure
Optical Drive: LG BD-RE BH16NS40 BluRay Drive
Please help..
I just finished to build my new PC based on a i7 4770k Processor and an Asus Z87-DELUXE motherboard.
I don't overclock but I keep getting the error since the computer was born (the first time when I got this error was his second power on when I finished to build the system).
The error is:
"CPU Temperature Error - Press F1 to run setup" -
IMAGE attached:
I tried several thing:
a) Changed the OS from Win 8 to Win 7
b) removed the stock i7 CPU Cooler and buyed a new one: Cooler Master Hyper TX3 EVO - same error
c) tried 3 diferent cooling pastes (Intel stock paste and 2 Cooler Master pastes)
c) Updated the BIOS to last one (from Dec 2013)
I can delete this error only:
1) if remove the CPU cooler and replace it back
2) if I remove the Motherboard battery...
3) only if I ignore the temperature in the BIOS.. (but I really want to monitor the temperature in BIOS !)
IMAGE
Every piece of the computer is new, and the problem is strange..
Real Temp 3.70 shows a minimum of 28 Celsius Degree and a maximum of 64 Celsius for the CPU...
IMAGE
The error is very annoying because i want to keep the bios CPU temperature to be monitored...
Right now, the only thing I can to to enter Windows is to ignore the bios temperature or remove the mobo battery or removal of CPU cooler - any of each procedure will remove temporary the error...
It is the mobo temperature faulty ?
What else should I try ?
The specs are:
Motherboard: Asus Z87-Deluxe
CPU: Intel Core i7-4770K Quad-Core 3.5 GHZ 8 MB Cache BX80646I74770K
Memory: Corsair Vengeance 16GB (2 x 8GB) DDR3 1600 MHz (PC3 12800) CML16GX3M2A1600C9
SSD for OS: Samsung Electronics 840 EVO-Series 250GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE250BW
HDD: Seagate Barracuda 3 TB HDD SATA 6 Gb/s NCQ 64MB Cache 7200 RPM 3.5-Inch Internal Bare Drive ST3000DM001
Case: Cooler Master Silencio 650 Pure
Optical Drive: LG BD-RE BH16NS40 BluRay Drive
Please help..