Ok, so im not new to the pc scene, and have done a load of research on haswell overclocking but im having some major difficulty. From all i have read the voltages vary widely from chip to chip but to get a stable overclock im having to increase my vcore to over 1.25 just to hit 4.0ghz. My current rig is:
4670k
asrock z87m extreme4
Gskill 1866 8gb
thermaltake 600w psu
evo 212
evga 660 sc
temps stay in the 60-65c range which seems ok. I have tried to get to the 4.4ghz by setting my vcore to 1.25 override and it would only go as far as the windows startup screen the bsod with a code of 124. With the uncore clock set at 34 VCin set to 1.95 all the power saving options disabled. And my ram set to 1600mhz.
I think i lost the "silicon lottery" as everyone has been saying.
I have a few questions though. Firstly, in the uefi there is a setting for FIVR switch frequency which i tried to google but came up empty handed. What is this. and is it safe to go over 1.3v. i got the system to run on 1.3v vcore 1.95 vcin ram set to 1600. But was not stable at all. but temps where good in prime95.
o and my auto settings voltages are as follows
vcore 1.186
vccin 1.768
seems kinda high to me, should i try to reseat the cpu?
kinda bummed since i bought a "k" series cpu for the purpose of overclocking and it has a hard time going over 4.0ghz.
any help is appreciated...
ps need more specs lmk.
4670k
asrock z87m extreme4
Gskill 1866 8gb
thermaltake 600w psu
evo 212
evga 660 sc
temps stay in the 60-65c range which seems ok. I have tried to get to the 4.4ghz by setting my vcore to 1.25 override and it would only go as far as the windows startup screen the bsod with a code of 124. With the uncore clock set at 34 VCin set to 1.95 all the power saving options disabled. And my ram set to 1600mhz.
I think i lost the "silicon lottery" as everyone has been saying.
I have a few questions though. Firstly, in the uefi there is a setting for FIVR switch frequency which i tried to google but came up empty handed. What is this. and is it safe to go over 1.3v. i got the system to run on 1.3v vcore 1.95 vcin ram set to 1600. But was not stable at all. but temps where good in prime95.
o and my auto settings voltages are as follows
vcore 1.186
vccin 1.768
seems kinda high to me, should i try to reseat the cpu?
kinda bummed since i bought a "k" series cpu for the purpose of overclocking and it has a hard time going over 4.0ghz.
any help is appreciated...
ps need more specs lmk.