Is it possible to fix a bent Power supply pin?

Toggle sidebar Toggle sidebar
C

Charlie Pawlak

Honorable
Sep 29, 2013
192
0
10,710
I got a Corsair CX600 600w power supply, but when I did the green+black wire test, I accidentally split the green wire pin on the ATX 24-pin. Will the power supply still work like this? Is there any way to fix?

1621276_orig.jpg
 
Solution
hunter315
Get yourself a pair of needle nosed pliers or something thin enough to get in on each side and give it a bit of a squeeze, all the connectors are split on top, that one just separated at bit. If you push it together so the top two bits touch it should work just fine. I think in its present state it would bind going into the main ATX connector on the board.
Sort by date Sort by votes
hunter315

hunter315

Champion
May 12, 2009
10,653
3
51,960
Get yourself a pair of needle nosed pliers or something thin enough to get in on each side and give it a bit of a squeeze, all the connectors are split on top, that one just separated at bit. If you push it together so the top two bits touch it should work just fine. I think in its present state it would bind going into the main ATX connector on the board.
 
Upvote 0 Downvote
Solution
C

Charlie Pawlak

Honorable
Sep 29, 2013
192
0
10,710




Thanks man!
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom