I just put together a new system today and when I start it there is nothing on the monitor and 1 continuous beep followed by 4 beeps during POST (hardware component failure according to documentation). The only led indicator that is on after the POST is the VGA led. I have tried resetting CMOS, updating BIOS, reseating GPU, and putting GPU in a different slot. All end with what I described above, very frustrating. I know the GPU works as it is only a couple weeks old and was working in my other PC earlier today.
It's also worth noting that the fan is spinning fast and steady on the card so I don't think it's a power issue.
System:
CPU: AMD FX8350
MOBO: M5A99FX Pro R2.0
RAM: 2x4gb Corsair XMS 1333 MHz
PSU: Corsair 600 watt CX600 Builder Series
GPU: MSI NVidia GeForce 210 2-DVI GDDR2 512MB (Yes, I am aware this low end part isn't up to par with the rest of my system, but ran out of money ... next upgrade ...)
I am really hoping someone can help, this is driving me nuts and I need to get back to work. I hope I don't need to replace GPU as I am tapped out. GPU works fine in previous system ...
Thanks in advance
UPDATE: Now the beep pattern is 1, 3 (No VGA Detected)
It's also worth noting that the fan is spinning fast and steady on the card so I don't think it's a power issue.
System:
CPU: AMD FX8350
MOBO: M5A99FX Pro R2.0
RAM: 2x4gb Corsair XMS 1333 MHz
PSU: Corsair 600 watt CX600 Builder Series
GPU: MSI NVidia GeForce 210 2-DVI GDDR2 512MB (Yes, I am aware this low end part isn't up to par with the rest of my system, but ran out of money ... next upgrade ...)
I am really hoping someone can help, this is driving me nuts and I need to get back to work. I hope I don't need to replace GPU as I am tapped out. GPU works fine in previous system ...
Thanks in advance
UPDATE: Now the beep pattern is 1, 3 (No VGA Detected)
Facebook
Twitter
Instagram