Sign in with
Sign up | Sign in
Your question
Solved

Corsair h105 fit in phantom 410?

Last response: in Components
Share
January 30, 2014 6:02:08 AM

Does the corsair h105 fit in NZXT Phantom 410? if it helps i have Maximus 6 formula motherboard
February 14, 2014 4:30:44 PM

I have the Phantom 410 too with an Asus ROG Hero and i can confirm that the h105 fits perfectly under the top cover!
And the h105 rocks, keeps my i5 icy :) 
m
0
l
April 27, 2014 10:35:09 PM

@Nordiga
I have Nzxt Phantom 410 Black and Corsair H105, I tried to Install it on the top and the fan inside of case, the radiator outside of case, it does fit but the problem is i can't close the top cover of case ? how do you install/fit on it ?
Could you please explain it and attach some picture if possible ( i'm still new and this is my first build so i'm little confused)..

Thank you Very Much..
m
0
l
Related resources
April 29, 2014 4:20:36 AM

silverdenz said:
@Nordiga
I have Nzxt Phantom 410 Black and Corsair H105, I tried to Install it on the top and the fan inside of case, the radiator outside of case, it does fit but the problem is i can't close the top cover of case ? how do you install/fit on it ?
Could you please explain it and attach some picture if possible ( i'm still new and this is my first build so i'm little confused)..

Thank you Very Much..


Well im not at home at this moment, so i cant help you with pics, i just wanna ask if u found solution to your problem, because i saw you opened a thread and had some answers there.
If not, let me know, and i try to help you later today.
I had no problem whatsoever, i think if you are careful with the installation process it gonna fit just fine!

m
0
l
April 29, 2014 4:28:49 AM

Well i just got a tape measure and had a look, and now that im looking at it. My H100i is just about touching the motherboard so i have come to the conclusion the the H105 will not fit. It may fit under the bessel (not sure though) with the fans pushing air through but which i prefer but that would mean taking my motherboard out in order to screw the fans in.
m
0
l

Best solution

April 29, 2014 9:33:11 AM

Exactly, thats the only way it fits....But it fits. Push configuration, with the fans inside the case pushing air through the h105 radiator installed on the top, out of the case, right under the plastic hood (with the tubes looking at the front of the case). You need to remove your motherboard to screw the fans, yeah, because the heatsink of the motherboard is in the way and you cant work your way with a screwdriver there.
It barely fits, it like 1-2 mm of distance between the radiator and the hood xDD Any bigger radiator simply wont fit there :p 
Share
April 29, 2014 7:28:59 PM

@Nordiga
ok thank you, by the way i have already solved it
i just open the front cover case and push the top case a bit and it closed.
m
0
l
!