- Jan 31, 2014
- 2
- 0
- 10,510
Hi Chaps
Having a problem setting up my first ever custom build.
I have installed 2 graphics card onto my Asus P8h77 Motherboard.
The graphics cards are AMD Radeon HD 7750 Crossfire.
When i plug a dvi into one card and a HDMI into another (to test to make sure i have them both working i only ever get signal from the first board or first slot. I cant figure out for the life of me how to get the second card working.
Both cards work 100% as have swapped them over in the slots.
I have updated my drivers so in device manager nothing is required.
I have made sure on the catalyst program that crossfire is enabled and have also been in the bios were i thik i have selected the right part for making it display multi monitors,
Any advice would be very appreciated.
Completely stuck atm..
Thanks
Iain
Having a problem setting up my first ever custom build.
I have installed 2 graphics card onto my Asus P8h77 Motherboard.
The graphics cards are AMD Radeon HD 7750 Crossfire.
When i plug a dvi into one card and a HDMI into another (to test to make sure i have them both working i only ever get signal from the first board or first slot. I cant figure out for the life of me how to get the second card working.
Both cards work 100% as have swapped them over in the slots.
I have updated my drivers so in device manager nothing is required.
I have made sure on the catalyst program that crossfire is enabled and have also been in the bios were i thik i have selected the right part for making it display multi monitors,
Any advice would be very appreciated.
Completely stuck atm..
Thanks
Iain
Facebook
Twitter
Instagram