Lately on my custom made computer I have been getting blue screens periodically usually they don't even show up for blue screen view to show me the problem and the last bsod I've had has given me a page fault in nonpaged area.
What are your complete system specs? Is this a system you made yourself, or is a pre-built OEM system? The first thing I would check is the RAM, but I'll wait until you post some more information about your system.
Made the system my self from the ground up
windows 7 ultimate 64bit
amd fx 4300 Base clock
gtx 660
8gb DDR3 G.Skill
Asrock 880gm-LE FX
977GB Seagate ST1000DM005 HD103SJ ATA Device (SATA)
What is the model number for your RAM? What PSU is powering the system? Did you manually set the RAM speed, timings, and voltage to the recommended settings in the BIOS? Have you run Memtest86+ to test for RAM errors?
F3-10666CL9-4GBNT
Corsair CX750 Builder Series CX 750W ATX/EPS 80 PLUS Bronze
Haven't changed any settings with the ram
Haven't used memtest86 but i did use the windows Memory Diagnostic tool and found no problems