Why won't my 3570k go past x34 multiplier?

Toggle sidebar Toggle sidebar
H

Hype S

Honorable
Jul 3, 2013
37
0
10,530
So I followed everything in the 2500k/2600k OC guide,
disable :
Limit CPUID max
Power Technology
C1E support
OverSpeed Protection
Spread Spectrum..

Enable : (already enabled but yeah)
Internal PLL Overboltage
Execute Disable Bit
Intel Virtualization Tech.



Then adjusted the turbo boost ratio to 42, nothing happens. in CPU-Z, it shows as x34, never goes higher.

So I searched, and tried setting Vdroop to +100% and also Enabling "Adjust CPU ratio in OS"

but nothing happens. it's still capped at 34. After I disabled Intel Turbo Boost, it stays at 34 instead of moving between 16 and 34, but it still won't go any higher.

In BIOS, it says it's 4200, so does my computer properties. but CPU-Z disagrees. What's happening?


CPU 3570k
Board : MSI Z77A-GD55
RAM : Patriot Viper 2x8GB 1600mhz @ 1.500v
Rosewill Hive 550W modular
EVGA GTX 670 FTW Sig 2
250GB Samsung 840 series SSD
1TB seagate
4TB seagate
 
Solution
pauls3743
If memory serves it is the turbo boost clock you increase, you will also see options for how much boost you want to apply to 1, 2 and 4 cores ( 1 core had the highest boost, 2 cores wasn't so high and 4 cores was the lowest), you also need to increase these. I cannot remember being able to increase the base multiplier.
Sort by date Sort by votes
pauls3743

pauls3743

Distinguished
Dec 24, 2011
1,836
1
20,460
If memory serves it is the turbo boost clock you increase, you will also see options for how much boost you want to apply to 1, 2 and 4 cores ( 1 core had the highest boost, 2 cores wasn't so high and 4 cores was the lowest), you also need to increase these. I cannot remember being able to increase the base multiplier.
 
Upvote 0 Downvote
Solution
H

Hype S

Honorable
Jul 3, 2013
37
0
10,530



I read what you said, and did NOT touch the boost ratio that is Auto, Enabled some Boost thingy (Not Intel Turbo Boost. the one right under) and left Power Technology in Custom,(under CPU features) and raised each core's limit to 44 and it WORKS!!! thanks.

Everything still reads 3.4Ghz, but CPU-Z and increased fps, and increased flops(burn test) proved that it is overclocked.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom