need to know who makes or made this board.

[darkcrowe2]

Hey im trying to figure out who makes this mother board in my computer it is an AG PRO V:1.1C
15-p44-011130 it has an AMD sempron 3000 1.80 Ghz i would like to stick a bigger processor in it but i cant remember who made this board my box an manuel are long gone so now i dont know what other processor would be compatible with it. the charts are usless if you dont know the maker of the board to look it up. please help me figure this one out. i would like to say it is an ASUS or an ATX. but i dont know.

 

[rolli59]

With Sempron 3000+ it is hardly worth it changing a CPU from slow to little less slow! Nothing modern fits and money is best saved for a at least a low end modern upgrade.

 

[Someone Somewhere]

Yeah, I'd strongly suggest getting a new CPU, MB, and RAM all at the same time.

Chances are modern integrated graphics will wipe the floor with your old GPU, too.

 

[Deleted member 217926]

It really does not matter who made it. The board is obsolete to the point of having no value. It's a part you would have to pay someone to take rather than selling. There is no upgrade path that includes that motherboard. At bare minimum you need a new motherboard, CPU and RAM. Your power supply will almost certainly also need replacing as well as any graphics card you may have.

 

[EasyLover]

Most probably this is an ECS board. Check this link

http://www.ecs.com.tw/ECSWebSite/Pro...uID=48&LanID=0

ecs gs7610

 

[rolli59]

This program will list the board if run http://www.cpuid.com/softwares/cpu-z.html still stick to my recommendation not to bother upgrading.

 

[darkcrowe2]

It really does not matter who made it. The board is obsolete to the point of having no value. It's a part you would have to pay someone to take rather than selling. There is no upgrade path that includes that motherboard. At bare minimum you need a new motherboard, CPU and RAM. Your power supply will almost certainly also need replacing as well as any graphics card you may have.

well that is what i figured my psu is brand new so no ned to replece it my graphics is still very good nivida g force 9800 GT so no need to replace it. hard drive is new so i just need a new MB CPU an Ram.

 

[darkcrowe2]

Thank you so much for the advice guys yup after doing some looking i can rebuild this thing way cheaper than i thought i could.

 

[darkcrowe2]

alos after looking through my computer parts i forgot about my TForce 6100 AM2 board the one i was having problems with the memory going bad turns out it was not just the memory the cpu was going bad as well it was an athlon 6400 x2 i might just take a change an buy a new cpu an memory for that board an see what happens cpu and memory i cant get for cheap if i know where to look.

 

[Deleted member 217926]

AM2 is just as obsolete as the first system. If you will post a budget, country you live in and what you are going to use the computer for we can help you build a new one cheap. Include a list of your current parts you plan on reusing.

 

[darkcrowe2]

thanks guys i pretty know what i need to get now and thank you for the help.