Attempted my first build today. Once all components were installed I ran the Post test by turning on the PSU and powering up the machine. The MOBO and GPU both had green light on but the CPU did not. As soon as I pressed the power switch the CPU led flashes red once. The fans spin for around 5 seconds and the LED flashes red for a second time and the whole system powers off! I've rigged up my monitor and it displays a message saying "no VGA signal".
Any ideas on what the problem could be and how to fix it would be appreciated! It is my first build so even suggestions that would seem daft usually are more than welcome!
System Specs:
CPU: AMD FX 8350
CPU COOLER: Cooler Master Hyper 212 EVO
MOBO: ASUS M5A97 EVO R2.0
RAM: 8GB corsair vengeance ram 1600mhz (2x4GB)
GPU: ASUS R9 270x DCII OC
CASE: ZALMAN Z11 PLUS
PSU: corsair CX750M
Any ideas on what the problem could be and how to fix it would be appreciated! It is my first build so even suggestions that would seem daft usually are more than welcome!
System Specs:
CPU: AMD FX 8350
CPU COOLER: Cooler Master Hyper 212 EVO
MOBO: ASUS M5A97 EVO R2.0
RAM: 8GB corsair vengeance ram 1600mhz (2x4GB)
GPU: ASUS R9 270x DCII OC
CASE: ZALMAN Z11 PLUS
PSU: corsair CX750M