/ Sign-up
Your question

GA-78LMT-USB3 (rev. 5.0) ram overclock failure message

  • Overclocking
  • BIOS
  • RAM
  • USB3
  • Motherboards
Last response: in Motherboards
February 4, 2014 4:18:08 PM

I got this mobo a few days ago and I tried OC the ram and when I exit the bios I get this message :

The system has experienced boot failures because of overclocking .

I got this ram:Corsair Vengeance PC3-12800 DDR3 1600 4GB CL9 and I'm using them on 1333MHz not at 1600 how it supposed to be .

Can you help me to OC this Ram ?

Later I will buy Cooler Master Seidon 120V liquid to OC the CPU(my CPU "bottleneck" my GPU Sapphire R9 270x Toxic )but I think I will get the same message, I have FX6300 3.5GHz and I want to OC at 4.0-4.2 GHz.

Sorry for my bad english .

More about : 78lmt usb3 rev ram overclock failure message

Best solution

a c 4152 V Motherboard
a c 924 K Overclocking
February 4, 2014 4:24:04 PM

Mobo supports up to 1333, to run at 1600, can try manually setting frequency to 1600, base timings to 9-9-9-27, DRAM voltage to 1.6 and CPU/NB voltage to 1.25 and see if that will go
February 4, 2014 4:35:24 PM

I only changed the base timing and it works the CPU and The Ram Memory to OC both . I didn't touch the Voltages .

Ty so much !
a c 4152 V Motherboard
a c 924 K Overclocking
February 4, 2014 5:46:55 PM

No worries, glad