gryphon z87 flashing red led

Zef7

Honorable
Feb 4, 2014
5
0
10,520
Hey guys, my gryphon z87 motherboard has red flashing led lights at every location CPU, VGA, Boot and Dram.

If I press Memok, it restarts and brings me to the BIOs.... BUT

It froze a couple times and if I just complete BIOs with default it "Restarts" making me mouse, Keyboard and monitor flash on and off. At this point I am unable to do anything in BIOs or anything at all.

Thanks for your assistance.
 
Solution
Ok, so basically I installed the Graphics card and removed all usb cables from the motherboard. Plugged ubs in the front and connected the hdmi to the graphics card and all the red lights stopped. I then tried to repair my windows... didn't work. So i tried to reinstall windows... didn't work. I kept getting some hard drive error stating I cant reset the drive

I bought a new hard drive today and installed it and then installed windows. Everything is working. Thanks for you assistance!

Zef7

Honorable
Feb 4, 2014
5
0
10,520
Yeah I tried 1 stick, and triple check my PSU connections. Im running and nvidia 560 overclock but I removed it and am using an HDMI to test this.

I noticed the freezing has stopped and while my mouse/keyboard/monitor flash on and off I'm able to hit DEL key and it returns me to BIOs.

PSU is just a 540w atx12v
 

feelingtheblanks

Honorable
Jan 3, 2014
412
0
10,960
Sorry I couldn't quite get it. Did it stop freezing while you using the integrated gpu? Are you be able to do anything in the BIOS now? Can you boot to Windows? Or the same problem persists?

Update: Well you also might be having a PSU issue here. Is it just a no-name brand PSU?
 

Zef7

Honorable
Feb 4, 2014
5
0
10,520
I can play with the BIOs settings just fine now. however it does not boot to windows, it just goes back to the mouse, Keyboard and monitor flashing again.

I haven't plugged in the graphics card yet, been using the integrated
Yes my PSU is Dynex Brand which is bestbuy/off brand

Just purchased Cooler Master Silent Pro M2 - 850W Power Supply with 80 PLUS Silver Certification and Semi-Modular Cables
 

Zef7

Honorable
Feb 4, 2014
5
0
10,520
Update:

So i was able to get windows to appear, but now the problem is that windows wont open properly. I keep getting windows was unable to start properly errors and it tries to repair the errors. suggestions?
 

Zef7

Honorable
Feb 4, 2014
5
0
10,520
Ok, so basically I installed the Graphics card and removed all usb cables from the motherboard. Plugged ubs in the front and connected the hdmi to the graphics card and all the red lights stopped. I then tried to repair my windows... didn't work. So i tried to reinstall windows... didn't work. I kept getting some hard drive error stating I cant reset the drive

I bought a new hard drive today and installed it and then installed windows. Everything is working. Thanks for you assistance!
 
Solution

TRENDING THREADS