I started my first build and while testing I ran into memory problems, here are some key points:
1. The MemOK! LED stays lit
2. I am getting memory beep codes
3. I have tried the MemOK! Test and after it is done the LED remains lit
4. I have reseated the RAM in all slots
5. I have cleaned the RAM with a cotton cloth (can I use 70% alcohol?)
6. I have reset the BIOS through the jumper method using the jumpers
7. I have latest BIOS 2201
8. I got the RAM from Staples just the first DDR3 4GB I saw
9. I have one DDR3 4GB stick
10. Specs:
Mobo- M5A97 R2.0
CPU- FX-6300 3.5Ghz
GPU- msi GTX 770 2GB (was not connected when testing was done)
hard drive- seagate 1TB
Power supply- 620 Antec bronze certified
* if any more info is needed please PM or ask, thank you!
1. The MemOK! LED stays lit
2. I am getting memory beep codes
3. I have tried the MemOK! Test and after it is done the LED remains lit
4. I have reseated the RAM in all slots
5. I have cleaned the RAM with a cotton cloth (can I use 70% alcohol?)
6. I have reset the BIOS through the jumper method using the jumpers
7. I have latest BIOS 2201
8. I got the RAM from Staples just the first DDR3 4GB I saw
9. I have one DDR3 4GB stick
10. Specs:
Mobo- M5A97 R2.0
CPU- FX-6300 3.5Ghz
GPU- msi GTX 770 2GB (was not connected when testing was done)
hard drive- seagate 1TB
Power supply- 620 Antec bronze certified
* if any more info is needed please PM or ask, thank you!