Sign in with
Sign up | Sign in
Your question

cpu insane temp! need help asap

Tags:
  • Overdrive
  • CPUs
  • AMD
Last response: in CPUs
Share
a b à CPUs
February 6, 2014 8:27:55 AM

hi guys i have 3 scenarios

picture 1 https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/...

AMD Stability test. no problems with stability never had an error 100% usage
coretemp says temp is 39C
AMD overdrive says 30.8C

picture 2 https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/...

Prime 95 test. didnt have an error

coretemp 41C
hwmonitor 41C
amd overdrive 28.6

picture 3 this is insane https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/...

still no errors but further tests maybe test 5

amd overdrive 185C
coretemp 255C
hwmonitor 206C

and i also have an idle photo but didnt upload it

AMD 53.9C
Coretemp 16C
Hwmonitor 16C

guys do you think my temps are credible? is it possible to go as high as 255 and not burn the chip and not create errors? i think when i have those insane temps, it lasted 5-10 mins before i got
scared and stopped prime95.

im also running the amd stability test right now

amd overdrive 29C
hwmonitor 41C
coretemp 41C

More about : cpu insane temp asap

a c 108 à CPUs
a b À AMD
February 6, 2014 8:34:27 AM

none of the screenshots work, but 200+C definitely wasn't real, at those temperatures the cpu would burn a whole in the socket.
m
0
l
a b à CPUs
February 6, 2014 8:41:48 AM

laviniuc said:
none of the screenshots work, but 200+C definitely wasn't real, at those temperatures the cpu would burn a whole in the socket.


and right now coretemp has it 16C and amd overdrive has it for 50C both same time and while running amd overdrive stability test

is the problem on the software or in my mobo temp sensor?

m
0
l
a c 108 à CPUs
a b À AMD
February 6, 2014 8:46:45 AM

try to start prime and open the case and check manually how hot the cpu heatsink is and if the fan is spinning.
check that the cooler is properly seated. (try to tilt it, see how hard / easy it moves)
m
0
l
a c 108 à CPUs
a b À AMD
February 6, 2014 8:47:42 AM

if the cpu is 200C+ you couldn't touch that heatsink and if it's properly seated there's no way it would reach 80+ even if there's no thermal paste at all
m
0
l
a b à CPUs
February 6, 2014 8:59:00 AM

wouldnt a 200C+ melt my motherboad?
m
0
l
a b à CPUs
February 6, 2014 9:09:35 AM

laviniuc said:
if the cpu is 200C+ you couldn't touch that heatsink and if it's properly seated there's no way it would reach 80+ even if there's no thermal paste at all


tried touching it when it was reading 185. my heatsink isnt hot at all.
m
0
l
a c 108 à CPUs
a b À AMD
February 6, 2014 10:05:49 AM

which means either the heatsink it's thoroughly placed on the cpu - you can check by trying to tilt it as i said, if it's seated ok it will move only a little bit - power off before trying!

or the readings are wrong - either sensor or program used for reading but since all seem to be wrong... probably sensor.
m
0
l
!