Corsair H80 Help !

Zaman786Ahmad · Feb 6, 2014

just installed my H80 and found theirs a problem. The only way to change the fan speed is through the button on the pump. apparently corsair link will let you change in via windows but it saying no pump and fan is detected also when i was playing SR4 i found it didn't change at all still on the quiet mode.also idle temps are 30-40

VanillaSprinkles · Feb 6, 2014

Are you using windows 8?

Zaman786Ahmad · Feb 6, 2014

VanillaSprinkles :

yeah

VanillaSprinkles · Feb 6, 2014

Zaman786Ahmad :

Right now corsair link doesn't detect the pump or the fans on the radiator for windows 8 and 8.1. I have the H80i and it really pisses me off how they haven't fixed this yet. You can download the beta software for windows 8 but it still doesn't work for me.

jimmysmitty · Feb 6, 2014

Follow this:

http://forum.corsair.com/v3/showpost.php?p=676000&postcount=19

I had to do the same thing. There is no official update for Windows 8 yet and it is an issue on how it handles USB. They may fix it but I don't know when, until then this registry fix works.

Zaman786Ahmad · Feb 6, 2014

VanillaSprinkles :

jimmysmitty :

what USB?

VanillaSprinkles · Feb 6, 2014

Zaman786Ahmad :

VanillaSprinkles :

jimmysmitty :

what USB?

Did the cooling brick plug in to your mobo via usb?

VanillaSprinkles · Feb 6, 2014

Zaman786Ahmad :

I dont think that the H80 can be adjusted using LINK because it doesn't plug into the mobo so the only way to adjust the fan speeds is by the button the on the water brick thingy.

Zaman786Ahmad · Feb 6, 2014

VanillaSprinkles :

Zaman786Ahmad :

I dont think that the H80 can be adjusted using LINK because it doesn't plug into the mobo so the only way to adjust the fan speeds is by the button the on the water brick thingy.

i have a molex for and a 3 pin connected to the mobo

VanillaSprinkles · Feb 6, 2014

Zaman786Ahmad :

VanillaSprinkles :

i have a molex for and a 3 pin connected to the mobo

Yeah sorry but I don't think you can adjust it with LINK because it needs to be connected via usb like the H80i and the H100i

jimmysmitty · Feb 6, 2014

Only th I series have Link support. You have to press the button on the block to get it to change speeds.

Zaman786Ahmad · Feb 7, 2014

any DIY mods to do this without opening the side panel

VanillaSprinkles · Feb 7, 2014

Zaman786Ahmad :

I don't think so because the motherboard can't communicate with the cooler because it is not connected via USB

Zaman786Ahmad · Feb 7, 2014

VanillaSprinkles :

is there no cables i can buy for this to work ?

VanillaSprinkles · Feb 7, 2014

Zaman786Ahmad :

No because there are no places to plug the USB cable in the water cooling brick thingy.

Zaman786Ahmad · Feb 8, 2014

what were corsair thinking :#

VanillaSprinkles · Feb 8, 2014

Zaman786Ahmad :

This:

Zaman786Ahmad · Feb 8, 2014

VanillaSprinkles :

is that the h80i ? , il check to see if ive got that as my fans in the way ,also do i need the cor sair link kit

VanillaSprinkles · Feb 9, 2014

Zaman786Ahmad :

No thats the H80. And you cant use corsair link with the H80. There is no way to plug it in to the mobo via usb

Zaman786Ahmad · Feb 9, 2014

VanillaSprinkles :

Zaman786Ahmad :

No thats the H80. And you cant use corsair link with the H80. There is no way to plug it in to the mobo via usb

i had my profile set to queit/ low rpm , its to lowest setting ucan have and i ran prime 95 for 20 mins and it didnt go over 43 degress is that fine

Zaman786Ahmad · Feb 10, 2014

I looked at the h80 box and in the bottom right it says "corsair link digital" . Here have a look http://www.hardwareheaven.com/reviewimages/corsair-h80-antec-kuhler-920/corsair-h80-cooler_box.jpg. Any hints to why that's there as it's on mine so it must work some how

Corsair H80 Help !

Honorable

Honorable

Honorable

Honorable

Champion

Honorable

Honorable

Honorable

Honorable

Honorable

Champion

Honorable

Honorable

Honorable

Honorable

Honorable

Honorable

Honorable

Honorable

Honorable

Honorable

Share this page