dump error 0x00000124
- Thread starter bc2003
- Start date
often its associated with voltage drops on systems that are running close to the minimum volts required for the likes of the cpu and ram. often it will show up on systems that run an overclock without the required voltage bump. same for the memory.
on my system i got it a few times when i tried to run the memory at 1.5v when it needed 1.6 to be stable.
on my system i got it a few times when i tried to run the memory at 1.5v when it needed 1.6 to be stable.
could you do us a favour and post the full error code. you can find it in the event logs (ctrl panel/admin tools/events viewer) or use bluescreenviewer and create a log file from it. (post it on a file host and link it here)
you should see the stop error 124 with 4 or so other numbers behind it.
they should tell us which piece of hardware or driver is causing the issue.
as you on stock auto its unlikely that its a voltage issue. i mentioned it because thats how i came across it when i was overclocking.
you should see the stop error 124 with 4 or so other numbers behind it.
they should tell us which piece of hardware or driver is causing the issue.
as you on stock auto its unlikely that its a voltage issue. i mentioned it because thats how i came across it when i was overclocking.
TRENDING THREADS
-
-
-
Question Help in troubleshooting possible graphics card issue?
- Started by nort99
- Replies: 5
-
Question RX 6600 visual glitches right after upgrading to it- Started by Wamek
- Replies: 4
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 35
-
Facebook
Twitter
Instagram