I have just built a custom PC which powers up fine (power LED turns on, fans spin and disk drive opens), but when I connect the VGA cable from the PC to the monitor nothing happens. Before the monitor is connected to PC it says something like 'cable undetected' and as soon as I plug it into the PC it says 'No signal' for a few seconds and turns off.
The graphics card is an EVGA GEFORCE GTX 650ti BOOST.
I have tested the monitor, PC and VGA cable individually and they all seem to work. When I plugged the VGA cable from a laptop to the monitor then it worked, so I don't think the VGA or monitor are faulty or broken. Also, the USB ports on the motherboard work as well so I assume that the rest of the ports, including the VGA one, should also be working.
Any help would be greatly appreciated
The graphics card is an EVGA GEFORCE GTX 650ti BOOST.
I have tested the monitor, PC and VGA cable individually and they all seem to work. When I plugged the VGA cable from a laptop to the monitor then it worked, so I don't think the VGA or monitor are faulty or broken. Also, the USB ports on the motherboard work as well so I assume that the rest of the ports, including the VGA one, should also be working.
Any help would be greatly appreciated
Facebook
Twitter
Instagram