Gigabyte R9 280x windforce 3x low fps in games, please help

Toggle sidebar Toggle sidebar
R

RonnV

Honorable
Feb 8, 2014
14
0
10,510
i recently bourght a Gigabyte R9 280x windforce 3x GPU hoping it would make my gaming experience better. but i've run into some problems. when i run the games (BF4, Arma 3) the FPS i should have according to several review etc. is alot lower on my rig. sometimes unplayable. in Battlefield 4 i should get around 60 fps according to reviews etc. but i only get like 30-40. is this possibly bottlenecking, or is my rig just bad ?

my rig.

- AMD Phenom II X6 1055t 2.8GHz
- 8Gb Kingston Hyperx 1600Mhz
- Gigabyte R9 280x 3Gb DDR5
- Windows 7 64-bit

please help me out. thanks in advance.
 
Solution
smartkid95
Sort by date Sort by votes
R

RonnV

Honorable
Feb 8, 2014
14
0
10,510


do you by anychance have a solution to what i could do to make it better, or even good ?
 
Upvote 0 Downvote
smartkid95

smartkid95

Distinguished
Sep 2, 2009
153
0
18,710
phenom X6 with a 280x Ouch!
2.8 ghz Double Ouch!
I hate to do this to you but the other two posts are correct you have a definite cpu bottleneck. If you feel comfortable with it you can overclock. The phenom X6 was a very respectable gaming processor when it came out however that was about 3-4 years ago now, and back then gamers were pushing it at near 4.0ghz. At that time the phenom x6 was just barely able to keep up with 5870s which were the top of the line GPU. you figure that the 280x is about 40% faster than the 5870s were and there is your bottleneck. Depending on your motherboard you might be able to upgrade to the new AMD processors and the fx8350 is a great starting point. If you decide to try any of my suggestions as a start let me know how it works out.
 
Upvote 0 Downvote
R

RonnV

Honorable
Feb 8, 2014
14
0
10,510


i already overclocked my cpu to 3.3Ghz. and it is stable i did ths by only setting the HT frequency to 230 i believe with a 14x multiplier. i didnt put up the voltage. but if i put it higher than 3.3Ghz my screen freezes. does yhis mean i have to up the voltage on the cpu ? and btw my motherboard has the AM3 socket, so upgrading the cpu would only be the last way out if my cpu dies during overclocking.

 
Upvote 0 Downvote
smartkid95

smartkid95

Distinguished
Sep 2, 2009
153
0
18,710


ok usually you can increase voltage slightly if you run into instability but you also need some serious cooling once you start playing with voltages. If you want to try overclockobg higher there is a whole thread on here about that that I would recommend you check out. but for now make sure your drivers are up to date and consider a new CPU in the mean time if you want to try over clocking go for it from were you are 4.0 is about a 20% gain which usually for phenoms gets you about a 20-25% gain in gaming if remember correctly.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom