Solved

[Build Help] Where to mount a XSPC Photon 170 in a NZXT H440

Basically as above. I am looking at getting a custom water cooling loop and getting the NZXT H440. However my dilemma is I don't know where I could mount the pump/res combo. I was thinking near the rubber grommets at the back or near where the ssds are, do you guys agree with me or have any better suggestions. Also I qould rather not be drilling holes into my case, how else could I moint it? Thanks for your help in advance.
7 answers Last reply Best Answer
More about build mount xspc photon 170 nzxt h440
  1. Your best bet is to mount the res/pump combo to the front rad/fans.


    That is what I would do.
  2. Thanks for the reply, someone else on reddit suggested this to me as well, I will probably do this once I have all the goodies.
  3. xD3aDPooLx said:
    Your best bet is to mount the res/pump combo to the front rad/fans.


    That is what I would do.


    What will be the best way to mount this, except drilling holes. I was thinking industrial strength double sided tape or super glue.
  4. Best answer
    This is what I was thing you can use to mount the Res clips to.

    http://www.frozencpu.com/products/14355/ex-rad-318/Bitspower_120mm_Water_Tank_Mount_Panel_BP-120WTMP-BK.html?tl=g30c97s169&id=T2e8dmdV

    They will mount to the rad, so no drilling.
  5. xD3aDPooLx said:
    This is what I was thing you can use to mount the Res clips to.

    http://www.frozencpu.com/products/14355/ex-rad-318/Bitspower_120mm_Water_Tank_Mount_Panel_BP-120WTMP-BK.html?tl=g30c97s169&id=T2e8dmdV

    They will mount to the rad, so no drilling.


    These will take up a fan slot I guess?
  6. No they get added on top on the fans or rad.
  7. xD3aDPooLx said:
    No they get added on top on the fans or rad.


    That makes it alot easier, thanks for the reply :)
Ask a new question

Read More

NZXT Water Cooling Components