- Feb 11, 2014
- 2
- 0
- 10,510
Had a good search on the internet for this but found nothing.
I have an Akasa Baymaster S. It has 3 connectors, power (molex), USB 3.0 (which has to be routed out the back of the case and into an external port) for the SSD reader and a USB 2.0 header cable for the card readers.
Problem is, the internal USB 2.0 plug is 4 pin (GND, D+, D- and 5V), the USB sockets on my mobo (Asus Z87) are all standard 9 pin (5 pins on the top row, 4 on the bottom).
So how do I plug it in? I don't want to damage the mobo but I'm guessing I plug it into the row of 4 pins?
I have an Akasa Baymaster S. It has 3 connectors, power (molex), USB 3.0 (which has to be routed out the back of the case and into an external port) for the SSD reader and a USB 2.0 header cable for the card readers.
Problem is, the internal USB 2.0 plug is 4 pin (GND, D+, D- and 5V), the USB sockets on my mobo (Asus Z87) are all standard 9 pin (5 pins on the top row, 4 on the bottom).
So how do I plug it in? I don't want to damage the mobo but I'm guessing I plug it into the row of 4 pins?
Facebook
Twitter
Instagram