Sign-in / Sign-up
Your question
Solved

cant boot up my pc

Tags:
  • Boot
  • Memory
Last response: in Memory
February 14, 2014 9:00:21 AM

Recently i build my new pc.
PC SPECS:
MOTHERBOARD, MSI 970A G43 AM3+
CPU, AMD FX-6300 3.5 GHZ
VGA:MSI R9-270X HAWK EDITION
RAM:2X4 GBS CRUCIAL BALLISTIC SPORT X 1866 MHZ
500GB HDD
500 WATT PSU WITH EVERY CONNECTOR I NEED FOR MY PC BUILD.
DVD WRITTER.
So the problem is that when i booted up my pc with those module memories the bios didnt boot and the monitor was displaying nothing.Every time i boot up my pc with different modules (1x2gb corsair dd3 1300 mhz)it is starting up normally. So what do you think? Pls reply i need a solution fast... :( 

More about : boot

February 14, 2014 9:03:50 AM

2 things:
1. Your ballistic sport memory modules may not be compatible with your current motherboard.
2. The timings on it may not be set properly for your motherboard.
Good luck!
m
0
l
a c 140 } Memory
February 14, 2014 9:12:45 AM

with the old ram that works check the bios rev of the mb if it old it may need to be updated to run the newer ram.
m
0
l
Related resources
February 14, 2014 9:19:09 AM

Quarkzquarkz, why it could be possible to be non compattible memories? my mobo supports dd3 memories and with timing much better than mine's.
m
0
l
February 14, 2014 9:22:41 AM

i will try your solution smorizio and i will inform you with the latest news :D 
m
0
l
February 14, 2014 12:19:52 PM

Probably the bios of your motherboard
m
0
l

Best solution

a c 5305 } Memory
February 14, 2014 12:57:46 PM

Try pulling the old sticks, reset the CMOS and then install the new in the proper solts and give it a try
Share
February 18, 2014 12:36:31 PM

Tradesman1 said:
Try pulling the old sticks, reset the CMOS and then install the new in the proper solts and give it a try


m
0
l
February 18, 2014 12:40:23 PM

what is CMOS? finally i found from where the problem starts i use both ballistic x 4 gigs modular memories and my 2 gigs old one...and tara my pc booted up...when i search for my proccesing memory clock it says that its clocked in 1333 mhz allthough i have 2 4 gigs with 1888 mhz so i finally end up with the though that i need bios update...thank you for informing me that way... so anyone can link me with my mobo drivers for my memories? my mobo is list on the top of the discussion..
:D 
m
0
l
February 18, 2014 11:44:21 PM

which of all i should download?i use win 7 64bit...
m
0
l
a c 5305 } Memory
February 19, 2014 6:28:53 AM

If unsure, download and install the latest of each
m
0
l