Sign in with
Sign up | Sign in
Your question

Cant get into BIOS, Make post and no graphic display.

Tags:
  • Power Supplies
  • RAM
  • Components
  • CPUs
  • BIOS
Last response: in Components
Share
February 15, 2014 5:04:21 AM

Hi. I recently started up my computer after leaving it for a month as ive been very busy, when did this i kept getting no video input. So thought id reconnecting everything and make sure still got the same result. So replaced the cables reseated the graphics card ( MSI 560ti) and still nothing. Then i swapped lanes and nothing.

Took out everything except for gfx card and still make POST and get not video input.

I've dismantled everything and rebuilt it 3 times still having no luck.

Cleared the Cmos for long time and took out the mother boards battery nothing.

Swapped lanes for the Ram sticks and still nothing at all.

Unplugged everything and made sure no power running through it then connected PSU and MOB battery and still nothing.
Any ideas on what else I can do??

More about : bios make post graphic display

a b ) Power supply
a b à CPUs
February 15, 2014 11:02:28 PM

Try starting the motherboard up with only one stick of RAM in and with the graphics card out. That means you have to plug the VGA into the motherboard's VGA.
m
0
l
February 17, 2014 3:22:57 PM

pcgaming98 said:
Try starting the motherboard up with only one stick of RAM in and with the graphics card out. That means you have to plug the VGA into the motherboard's VGA.


I just tried that and still nothing! :( 

m
0
l
Related resources
a b ) Power supply
a b à CPUs
February 17, 2014 6:43:55 PM

Then attempt with one stick of RAM and have the monitor plugged into the GPU. Nothing probably showed since your processor might not have an integrated graphics component, which is necessary to utilize the motherboard's VGA.
m
0
l
February 18, 2014 10:39:39 AM

Still nothing as well! Tried all the RAM slots with each RAM stick and nothing swapped to different PCI-e slot and nothing as well
m
0
l
!