K KokBlok Honorable Feb 9, 2014 63 0 10,630 Feb 15, 2014 #1 Hey guys I was just wondering if the g.skill ripjaws x 8gb 2x4 will fit with the cm hyper 212 evo. I know the heatsinks on the ram are quite big and ive seen a few reviews of people saying it might not fit . thanks in advance
Hey guys I was just wondering if the g.skill ripjaws x 8gb 2x4 will fit with the cm hyper 212 evo. I know the heatsinks on the ram are quite big and ive seen a few reviews of people saying it might not fit . thanks in advance
Solution USAFRet Feb 15, 2014 If you're using two sticks, put them in slots 2 & 4 or Slide the fan up a little or Move the fan to the other side for Pull I have the 212 PLUS and low profile Corsair RAM. In slot 1, there is about 3mm clearance. RAM fins would screw that up.
If you're using two sticks, put them in slots 2 & 4 or Slide the fan up a little or Move the fan to the other side for Pull I have the 212 PLUS and low profile Corsair RAM. In slot 1, there is about 3mm clearance. RAM fins would screw that up.
dashboy1998 Honorable Feb 4, 2013 724 0 11,360 Feb 15, 2014 #2 If it's like this then Yes. Upvote 0 Downvote
USAFRet Titan Moderator Mar 16, 2013 171,486 17,933 184,590 Feb 15, 2014 Solution #3 If you're using two sticks, put them in slots 2 & 4 or Slide the fan up a little or Move the fan to the other side for Pull I have the 212 PLUS and low profile Corsair RAM. In slot 1, there is about 3mm clearance. RAM fins would screw that up. Upvote 0 Downvote Solution
If you're using two sticks, put them in slots 2 & 4 or Slide the fan up a little or Move the fan to the other side for Pull I have the 212 PLUS and low profile Corsair RAM. In slot 1, there is about 3mm clearance. RAM fins would screw that up.
P pbm86 Distinguished Jan 9, 2012 372 0 18,960 Feb 15, 2014 #4 The clearance depends on the motherboard and which DIMMs are occupied. On my motherboard at least one DIMM is under the fan. Upvote 0 Downvote
The clearance depends on the motherboard and which DIMMs are occupied. On my motherboard at least one DIMM is under the fan.
K KokBlok Honorable Feb 9, 2014 63 0 10,630 Feb 15, 2014 #5 I have a msi z87-g45 board. And a phantom 410 mid case Upvote 0 Downvote
K KokBlok Honorable Feb 9, 2014 63 0 10,630 Feb 15, 2014 #6 USAFRet : If you're using two sticks, put them in slots 2 & 4 or Slide the fan up a little or Move the fan to the other side for Pull I have the 212 PLUS and low profile Corsair RAM. In slot 1, there is about 3mm clearance. RAM fins would screw that up. I will be getting the black corsair vengeance low profile I think to ensure it fits properly. Will those rams work for my mb ? Upvote 0 Downvote
USAFRet : If you're using two sticks, put them in slots 2 & 4 or Slide the fan up a little or Move the fan to the other side for Pull I have the 212 PLUS and low profile Corsair RAM. In slot 1, there is about 3mm clearance. RAM fins would screw that up. I will be getting the black corsair vengeance low profile I think to ensure it fits properly. Will those rams work for my mb ?
USAFRet Titan Moderator Mar 16, 2013 171,486 17,933 184,590 Feb 15, 2014 #7 KokBlok : USAFRet : If you're using two sticks, put them in slots 2 & 4 or Slide the fan up a little or Move the fan to the other side for Pull I have the 212 PLUS and low profile Corsair RAM. In slot 1, there is about 3mm clearance. RAM fins would screw that up. I will be getting the black corsair vengeance low profile I think to ensure it fits properly. Will those rams work for my mb ? It should. Upvote 0 Downvote
KokBlok : USAFRet : If you're using two sticks, put them in slots 2 & 4 or Slide the fan up a little or Move the fan to the other side for Pull I have the 212 PLUS and low profile Corsair RAM. In slot 1, there is about 3mm clearance. RAM fins would screw that up. I will be getting the black corsair vengeance low profile I think to ensure it fits properly. Will those rams work for my mb ? It should.