Hi, i've built a new custom pc, but when i boot the pc the monitor says no signal input. The fans spin up and the fan led's turn on so i know that the pc is definatly on. The monitor is not the problem because it works in my old system and the cable is also not the problem. Im using the integrated graphics (hd 4600) on my new i5 - 4670k and i have tried using diffrent memory slots for the ram (started off with using slot 2 and 4 as thats what it says in manual for dual channel ram). I have checked for the compatibility of the components on the motherboard webiste and everything should be good to go
system specs
2tb hard drive
msi z87 gd 65 motherboard
8gb corsair vengance ram
i5 - 4670k paired with hyper 212 evo
corsair 750w 80+ bronze psu
zalman z11 plus case
I don't have a system speaker included with the motherboard so there are no beeps when the system starts so i can't debug that way.
i made sure that i kept myself static free when working with the components by touching the radiator/ case, and when i was installing the cpu/heatsink to the motherboard i put the motherboard on the motherboard box (as suggested in neweggs pc build video) due to it being a antistatic workstation
honestly i can't figure out what the problem is and i would appreciate some help, thanks.
system specs
2tb hard drive
msi z87 gd 65 motherboard
8gb corsair vengance ram
i5 - 4670k paired with hyper 212 evo
corsair 750w 80+ bronze psu
zalman z11 plus case
I don't have a system speaker included with the motherboard so there are no beeps when the system starts so i can't debug that way.
i made sure that i kept myself static free when working with the components by touching the radiator/ case, and when i was installing the cpu/heatsink to the motherboard i put the motherboard on the motherboard box (as suggested in neweggs pc build video) due to it being a antistatic workstation
honestly i can't figure out what the problem is and i would appreciate some help, thanks.