The Fractal Design Arc XL ( http://www.newegg.com/Product/Product.aspx?Item=N82E16811352035 ) comes with three 140mm fans installed and I want to add in two more ( http://www.newegg.com/Product/Product.aspx?Item=N82E16835352007 ), but I don't know what the setup should be... I'm going to be overclocking my CPU ( i7 4770k ) and most likely my GPU ( GTX 760 ). I'm kind of a lazy guy and don't really clean my computer out for dust that much... but I also want good air cooling for my GPU and CPU. Any suggestions for a good setup?
Fractal Design Arc XL 5 Case Fans?
- Thread starter Xealyth
- Start date
I have the same Arc XL case, with those included 3 x Fractal Design Silent Series R2 140mm fans.
Now I would like to add some more fan power, as I'm not going for water cooling just yet.
X99 board with 5820K or 5930K OC. Adding also Noctua NH-D15.
I'm going for 3 x Noctua NF-A14 PWM.
What would be the best setup, for 3x Noctua and 3x Fractal Desings?
I won't use the top HDD cage at all because I don't need it.
And I believe it's the best place 1) for more powerful Noctua, Directly aiming at GPU. At the middle of the frontplate - This is intake.
The other places are,
2) another right below the best place at the front - This is intake
3) one at bottom between HDD cage and PSU (if it fits? when 1200W psu there) - This is intake?
4) Backplate at the top - This is exhaust
5&6) At the top panel, back end - These are exhaust
How would you configure?
Now I would like to add some more fan power, as I'm not going for water cooling just yet.
X99 board with 5820K or 5930K OC. Adding also Noctua NH-D15.
I'm going for 3 x Noctua NF-A14 PWM.
What would be the best setup, for 3x Noctua and 3x Fractal Desings?
I won't use the top HDD cage at all because I don't need it.
And I believe it's the best place 1) for more powerful Noctua, Directly aiming at GPU. At the middle of the frontplate - This is intake.
The other places are,
2) another right below the best place at the front - This is intake
3) one at bottom between HDD cage and PSU (if it fits? when 1200W psu there) - This is intake?
4) Backplate at the top - This is exhaust
5&6) At the top panel, back end - These are exhaust
How would you configure?
TRENDING THREADS
-
-
Question Tried moving SSD from old PC to new one, now it won't boot from either
- Started by scyer327
- Replies: 9
-
Question why my pc dont have sound after install new Nvidia GPU Card?
- Started by sudsaviour
- Replies: 3
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 17
-
Facebook
Twitter
Instagram