Sign in with
Sign up | Sign in
Your question

Asus Sabertooth Z77 not posting-boot device led

Tags:
  • CPUs
  • Motherboards
  • LED Monitor
Last response: in Motherboards
Share
February 17, 2014 1:10:08 AM

Hello all I am hoping someone might be able to help

This weekend I moved my system from a haf932 to a new enthoo primo spending a full day installing the system with a full watercooling loop and on power up I was greeted with a boot device led. All fans, lights working properly. Screen has no signal and I am not getting any beeps.

Well I started disconnecting drives, usb ect with no luck. I tore the system down to cpu and one stick of ram outside the case and it's still not posting . The system has performed flawlessly up until now. I tried different ram, reseating the cpu, cmos clears, checking power cables, cpu fan header but nothing will allow the system to post. I did notice when I reseated the cpu one of the motherboard cpu pins was slightly bent. I was able to get it straight but still no luck. When I moved the system I did not remove the cpu, only the block so im curious about that. I also noticed my gtx 580 sags a little from the weight of the block but I still cannot get a post without it.

Any ideas or did the board just take a dump on me ?

I5 3570k
8gb corsair
Sabertooth z77
Coolermaster 850w
Evga gtx 580

More about : asus sabertooth z77 posting boot device led

February 18, 2014 3:59:15 AM

Was mb. Ok to close
m
0
l
!