Can I push Pull my H100i with 2 fan types?
Tags:
-
Cooling
- Fan
Last response: in Overclocking
Mirakledba
February 17, 2014 11:36:54 PM
dashboy1998
February 17, 2014 11:42:41 PM
Yes, but make sure the SP120 (Corsair right?) are push not pull they're not too good for pulling.
On a 2nd note AF120 are great for pull.
Edit: Check this: http://youtu.be/Kk7JMOcypus
On a 2nd note AF120 are great for pull.
Edit: Check this: http://youtu.be/Kk7JMOcypus
m
0
l
Mirakledba
February 17, 2014 11:45:50 PM
Look, I have two of these http://www.corsair.com/en/media/catalog/product/cache/1...
and http://www.corsair.com/us/media/catalog/product/cache/2...
the SP120s with the blue ring is the one that I mount at the BOTTOM OF THE RAD? and use those as PUSH so that I CAN SEE THE BLUE RINGS and the stock h100i ones how do i put them on the top? So the logo is poitng towards or away the rad?
and http://www.corsair.com/us/media/catalog/product/cache/2...
the SP120s with the blue ring is the one that I mount at the BOTTOM OF THE RAD? and use those as PUSH so that I CAN SEE THE BLUE RINGS and the stock h100i ones how do i put them on the top? So the logo is poitng towards or away the rad?
m
0
l
Related resources
- i have my corsair h100i with x2 120mm and x2 200mm in push pull . is the x2 200mm fans helping or not ? - Forum
- Corsair H100i Push/Pull config fan questions - Forum
- Should corsair h100i be push or pull with better fans? - Forum
- Which fans do I need to create a push/pull config on a Corsair H100i (high pressure or high airflow) to reduce noise? - Forum
- H100i Push/Pull Fans + Airflow - Forum
Mirakledba
February 17, 2014 11:47:49 PM
like the corsair SP120's are like https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcS... and the corsair h100i stock fans are like http://images.bit-tech.net/content_images/2012/12/corsa... BUT ON THE OTHER SIDE? See that ugly side of the fan? yeah, does the ugly side point towards the rad or away?
m
0
l
Mirakledba
February 17, 2014 11:49:39 PM
EasyLover
February 17, 2014 11:52:26 PM
dashboy1998
February 17, 2014 11:55:35 PM
EasyLover said:
Dear,When it comes to Corsair fans for radiator mounting. Don't buy SP120 Quiet Edition but buy SP120 Performance Edition and these fans will give you best push and pull configuration. Don't go for AF series as they are not for radiator mounting but for case air flow.
The AF does better for pull then the SP does for pull.
m
0
l
EasyLover
February 17, 2014 11:58:06 PM
Mirakledba
February 17, 2014 11:58:08 PM
Mirakledba
February 18, 2014 12:00:34 AM
EasyLover
February 18, 2014 12:00:52 AM
Mirakledba
February 18, 2014 12:03:08 AM
dashboy1998
February 18, 2014 12:08:28 AM
Mirakledba said:
Ok, now I just need to know how PUSH looks on a fan and how PULL looks....Since the red things on the sp120s will point DOWN meaning its push? And the sp120 L fans will have the ugly back part facing TOWARDS or away from the rad?EDIT: YOU SAID both on PULL? Or do you mean SP120 HP ON PUSH?
The side with the bars is where air is going and the side without is where it is coming from.

m
0
l
EasyLover
February 18, 2014 12:09:27 AM
Mirakledba
February 18, 2014 12:12:56 AM
I understand all of this. SP120 HP's at the bottom of the rad LIKE THIS http://cdn.overclock.net/6/61/350x700px-LL-61af8fe1_Pic...
and the sp120 L on top of the rad but the UGLY BACK PART http://img.hexus.net/v2/cooling/Corsair/H100i/H100i-03b...
the fan on the right, the back of the 120 L will be facing TOWARDS or away the rad? Thats all I want to know
both of you guys are telling me diff things like SP120 HP as PUSH and as PULL...I thought the HP's will be better for PUSH.
and the sp120 L on top of the rad but the UGLY BACK PART http://img.hexus.net/v2/cooling/Corsair/H100i/H100i-03b...
the fan on the right, the back of the 120 L will be facing TOWARDS or away the rad? Thats all I want to know
both of you guys are telling me diff things like SP120 HP as PUSH and as PULL...I thought the HP's will be better for PUSH.
m
0
l
dashboy1998
February 18, 2014 12:19:29 AM
Mirakledba said:
I understand all of this. SP120 HP's at the bottom of the rad LIKE THIS http://cdn.overclock.net/6/61/350x700px-LL-61af8fe1_Pic...and the sp120 L on top of the rad but the UGLY BACK PART http://img.hexus.net/v2/cooling/Corsair/H100i/H100i-03b...
the fan on the right, the back of the 120 L will be facing TOWARDS or away the rad? Thats all I want to know
both of you guys are telling me diff things like SP120 HP as PUSH and as PULL...I thought the HP's will be better for PUSH.
Yes that's right.
SP120 HP is better for push, it is not designed to pull air.
m
0
l
Mirakledba
February 18, 2014 12:21:11 AM
Ok, so that is that. And the SP 120 L (stock H100i fans) I still can use fort push right?....THE POINT IS, How is linus doing it in this rig? http://www.youtube.com/watch?v=cNEi8SvMYwM
m
0
l
dashboy1998
February 18, 2014 12:23:32 AM
Mirakledba said:
Ok, so that is that. And the SP 120 L (stock H100i fans) I still can use fort push right?....THE POINT IS, How is linus doing it in this rig? http://www.youtube.com/watch?v=cNEi8SvMYwMYes, like that.
m
0
l
Mirakledba
February 18, 2014 12:24:30 AM
dashboy1998
February 18, 2014 12:26:39 AM
Mirakledba said:
Ok there is still one thing NO ONE answered....I just want to know....the stock SP 120 L fans.....Yes, THEY ARE PULL, but, which way does the BACK UGLY PART face to? The rad? Or the top of the case....thats all ._. and will it cool better than sp120 HP on push alone? The back faces away from the rad.
Yes it'll work better then just the SP120 HP on push.
m
0
l
Mirakledba
February 18, 2014 12:28:41 AM
dashboy1998
February 18, 2014 12:30:28 AM
EasyLover
February 18, 2014 1:41:15 AM
Mirakledba
February 18, 2014 1:49:47 AM
EasyLover
February 18, 2014 1:53:53 AM
dashboy1998
February 18, 2014 1:58:06 AM
Mirakledba
February 18, 2014 2:27:23 AM
Mirakledba
February 18, 2014 2:29:31 AM
Mirakledba
February 18, 2014 2:33:41 AM
dashboy1998
February 18, 2014 2:45:58 AM
EasyLover
February 18, 2014 4:53:05 AM
Hey, dear,
Sorry for late reply as I was busy and had to attend two meetings. So Push, Pull or Push/Pull both.
You can go either way. But there is no as such benefit going with Push and Pull at a time. Check the below email. It'll give you the precise answer about this configuration:
https://www.youtube.com/watch?v=UyC3lZ5WFMk
Check this vid for fan choice.
https://www.youtube.com/watch?v=hiBUsbMYRH0
Hopefully, this will answer your query.
Sorry for late reply as I was busy and had to attend two meetings. So Push, Pull or Push/Pull both.
You can go either way. But there is no as such benefit going with Push and Pull at a time. Check the below email. It'll give you the precise answer about this configuration:
https://www.youtube.com/watch?v=UyC3lZ5WFMk
Check this vid for fan choice.
https://www.youtube.com/watch?v=hiBUsbMYRH0
Hopefully, this will answer your query.
m
0
l
Mirakledba
February 18, 2014 5:04:00 AM
EasyLover said:
Hey, dear,Sorry for late reply as I was busy and had to attend two meetings. So Push, Pull or Push/Pull both.
You can go either way. But there is no as such benefit going with Push and Pull at a time. Check the below email. It'll give you the precise answer about this configuration:
https://www.youtube.com/watch?v=UyC3lZ5WFMk
Check this vid for fan choice.
https://www.youtube.com/watch?v=hiBUsbMYRH0
Hopefully, this will answer your query.
Thanks
I saw that video or the dust on the rad today. I know how to mount it in push pull but the reason I KNOW mine wont get dusty is cause they will be pushing air out of the case and rad. And those SP120's in the video you send, I have 2 of them. I am going to get an AIR 540 https://www.youtube.com/watch?v=cNEi8SvMYwM see how he uses teo sp 120 hp's and two stock fans in Push Pull? Im going to be doing that. How does that sound?
m
0
l
EasyLover
February 18, 2014 5:24:51 AM
Mirakledba
February 18, 2014 5:43:00 AM
The only thing left on my mind is where should I plug in the STOCK sp120's...In the PSU or motherboard because I heard they are loud when its in the CPU block....Plus, Having 4 fans on the block is too much so do you recommend using molex from the psu or just connecting them to the motherboard? Because I dont know where to plug in the 3 fans that come with the 540.....motherboard or molex or what?
Thanks easy lover! Your name explains it all. You are very kind
Also, you have a great Rig!
Thanks easy lover! Your name explains it all. You are very kind
Also, you have a great Rig!
m
0
l
EasyLover
February 18, 2014 6:21:40 AM
Mirakledba said:
The only thing left on my mind is where should I plug in the STOCK sp120's...In the PSU or motherboard because I heard they are loud when its in the CPU block....Plus, Having 4 fans on the block is too much so do you recommend using molex from the psu or just connecting them to the motherboard? Because I dont know where to plug in the 3 fans that come with the 540.....motherboard or molex or what?Thanks easy lover! Your name explains it all. You are very kind
Also, you have a great Rig!Thanks dear for reading my rig
Pl create molex of all 4 fans and use it with corsair link (connecting with the mobo) Don't connect with PSU else you can't control the speed of the fans.Also I'm using 6 fans and system is quiet if not silent. Noise level should be at comfortable level.
My advice: Don't go for Push and Pull config. You'll be happy with Pull only
m
0
l
Mirakledba
February 18, 2014 7:00:56 AM
Easy Lover - Please explain what "PL" means and just a bit more clearly where and how I should plug them into the mobo, or are you saying dont put it in the mobo?
Is is this pull http://cdn.overclock.net/d/da/dab1059a_8296282818_42050... (the rad is OVER the mesh)
Because I want to be able to see my little blue rings (i will make them red) But yeah.
also, I just ordered the AIR 540. Plenty of room . So is push pull bad? If so, why? Again, is this pull http://cdn.overclock.net/9/9e/500x1000px-LL-9e044691_20... or is that push?
Is is this pull http://cdn.overclock.net/d/da/dab1059a_8296282818_42050... (the rad is OVER the mesh)
Because I want to be able to see my little blue rings (i will make them red) But yeah.
also, I just ordered the AIR 540. Plenty of room . So is push pull bad? If so, why? Again, is this pull http://cdn.overclock.net/9/9e/500x1000px-LL-9e044691_20... or is that push?
m
0
l
EasyLover
February 18, 2014 7:36:20 AM
Pl: Please
Pl have a look at H100i overview again. It has Corsair Link capability to monitor and control the fans. So it is better to link all fans using molex or y head splitters. It would be like all fans header cables will be going into a molex and then single molex output will be going to linkup with corsair link connector.
Check the guide for further details:
http://www.corsair.com/us/blog/how-to-install-the-hydro...
If you want to see your beautiful RED RINGS that would mean the fans will be pushing air thru the radiator to the top of the case for exhaust. In this case the top mounted fans will be exactly in the same direction as the bottom fans.
Hopefully this will be helpful.
Pl have a look at H100i overview again. It has Corsair Link capability to monitor and control the fans. So it is better to link all fans using molex or y head splitters. It would be like all fans header cables will be going into a molex and then single molex output will be going to linkup with corsair link connector.
Check the guide for further details:
http://www.corsair.com/us/blog/how-to-install-the-hydro...
If you want to see your beautiful RED RINGS that would mean the fans will be pushing air thru the radiator to the top of the case for exhaust. In this case the top mounted fans will be exactly in the same direction as the bottom fans.
Hopefully this will be helpful.
m
0
l
Mirakledba
February 18, 2014 7:42:01 AM
Yeah but as for "fans will be exactly in the same direction as the bottom fans." IS that a bad thing for good thing? And "fans will be pushing air thru the radiator to the top of the case for exhaust" Is that a bad thing or are both good? remember, I only will have 2 red rings so i dont care about the sp120 L's. And you say I should PLUG ALL FANS into the h100i block using that connector? I heard the stock fans are loud when their in there!
On a side note, what looks better? Having the H100i tubes coming from the left or from the right?
again, I already know how to mount the h100i and everything. Just talking about where is a good place for the SP120 Stock fans because the red rings fans will be connected to the pump but the sp120 L's..not sure.
On a side note, what looks better? Having the H100i tubes coming from the left or from the right?
again, I already know how to mount the h100i and everything. Just talking about where is a good place for the SP120 Stock fans because the red rings fans will be connected to the pump but the sp120 L's..not sure.
m
0
l
EasyLover
February 18, 2014 7:53:03 AM
Ok. In this context you can connect SP120 L (Stock fans) on either PSU 4 pin power cable or via y header splitter on any available fan header connector on your mobo.
Both configs are valid. No isse. Your Case has good air flow so any config can work.
Suit yourself. If Stock fans produce more noise. simply remove them. It won't really affect your temps though.
Both configs are valid. No isse. Your Case has good air flow so any config can work.
Suit yourself. If Stock fans produce more noise. simply remove them. It won't really affect your temps though.
m
0
l
Mirakledba
February 18, 2014 7:56:38 AM
EasyLover - Ok
If its loud I'll just try to connect the stock ones to the mobo and then maybe to the PSU and if its still loud, Ill remove them.
Thanks for the help. Sorry for bothering you
dashboy1998- I gave you solution in the other thread I made earlier so now I give it to easy lover. That way you both get solutions!
--If you want., Let me know if I should have the H100i tubes coming over the ram or from the left. Kinda confused. Look wise only.
If its loud I'll just try to connect the stock ones to the mobo and then maybe to the PSU and if its still loud, Ill remove them. Thanks for the help. Sorry for bothering you
dashboy1998- I gave you solution in the other thread I made earlier so now I give it to easy lover. That way you both get solutions!
--If you want., Let me know if I should have the H100i tubes coming over the ram or from the left. Kinda confused. Look wise only.
m
0
l
Davil
February 18, 2014 8:06:33 AM
Davil
February 18, 2014 8:06:35 AM
EasyLover said:
Ok. In this context you can connect SP120 L (Stock fans) on either PSU 4 pin power cable or via y header splitter on any available fan header connector on your mobo.Both configs are valid. No isse. Your Case has good air flow so any config can work.
Suit yourself. If Stock fans produce more noise. simply remove them. It won't really affect your temps though.
On an h100i there are 4 sets of fan power connectors on the top of the waterblock/pump that's what you should be using. They actually had push/pull in mind when they designed so they were nice enough to include that feature. As far as which one will do better anyone saying that there is going to be a real difference is just wrong. I did the exact same thing you are doing when I had a h100i. I experimented both ways and there was maybe 1 degree of difference.
If you're testing you have to be sure to let the system run so that the coolant gets to normal operating temperatures before you can really have a completely unbiased result, also you need to know ambient temperature because you're never going to cool below ambient temperature.
The other thing to consider is that the radiator you have is a thin low fin density type. That means static pressure is not going to really matter so much. If you want to have fun with it I won't tell you not to, but I will say you're trading a degree of temperature for several decibels more noise.
m
0
l
EasyLover
February 18, 2014 8:08:28 AM
Mirakledba
February 18, 2014 8:26:42 AM
Davil - The only reason I want to do Push Pull is to fill the top of the case cause the 540 has lots of room that I dont want to be empty. I MIGHT do push pull.
EasyLover - So in that image I will be using the one in the left I assume.
So you two both say I should NOT do push pull..hmm....
If I decide to do only one, linus says Pull but that looks ugly and I will make the red rings show and that is push I think....? Not sure.
EasyLover - So in that image I will be using the one in the left I assume.
So you two both say I should NOT do push pull..hmm....
If I decide to do only one, linus says Pull but that looks ugly and I will make the red rings show and that is push I think....? Not sure.
m
0
l
EasyLover
February 18, 2014 8:45:06 AM
Mirakledba said:
Davil - The only reason I want to do Push Pull is to fill the top of the case cause the 540 has lots of room that I dont want to be empty. I MIGHT do push pull.EasyLover - So in that image I will be using the one in the left I assume.
So you two both say I should NOT do push pull..hmm....
If I decide to do only one, linus says Pull but that looks ugly and I will make the red rings show and that is push I think....? Not sure.
Dear follow the left option. Two fans in bottom and two fans on the top. Btw bottom fans will have ring side facing downward (Isn't this what you have wanted). These two fans will be pushing air thru the rad and top fans will be pulling the air from the rad.
m
0
l
Mirakledba
February 18, 2014 8:53:26 AM
Best solution
EasyLover
February 18, 2014 8:56:07 AM
Mirakledba
February 18, 2014 8:58:46 AM
EasyLover
February 18, 2014 9:05:48 AM
Related resources
- Corsair h100i best push/pull fans? Forum
- SolvedPush & pull CPU fan setup.2 fans with diferrent max CFM air flow. Which fan should be doing the pushing? Forum
- Push/pull configuration with 2 120mm fans and one 200mm fan? Forum
- SolvedWhich fan should be push&pull? have 2 differ CPU fans Forum
- SolvedPush/Pull with (x2) 200mm fans on top, and (x2) 120mm fans on bottom? Forum
- SolvedHAF 912 case: internal corsair H100i radiator with 2 fans in pull configuration Forum
- SolvedCorsair h100i push/pull vs push vs pull Forum
- hi, which fans will be best for my mugen 2 push and pull? ***pictures INSIDE Forum
- Solvedhow to install push/pull on h100i? Forum
- SolvedH80i with push/pull or H100i with push or pull? Forum
- SolvedCorsiar h100i Push/Pull in Corsair 750D case placement? Forum
- SolvedH100i push vs pull Forum
- Solvedcorsair h100i push/pull Forum
- SolvedH100i Push pull nzxt 410 Forum
- Corsair 450D with H100i in Push-Pull? Forum
- More resources
Read discussions in other Overclocking categories
!
You use perfect grammar and spelling. You had to go to a meeting. You call me dear.