- Feb 18, 2014
- 2
- 0
- 4,510
When I put the graphics card inside and then turn the pc on, nothing comes on the screen neither do I get any power on usb devices, although I hear the computer running.
I have a 400watt psu.
When i remove the card everything works again.
I have tried to disable internal graphics from bios and I have tried to install the supplied drivers, but nothing seems to work with this graphics card.
Acer x3810 that I have has 7 gb of ram and windows 8 and 7 dualboot.
The acer has a service manual that I found online, giving more detail about the system.
http://extreme.pcgameshardware.de/attachments/599141d1352190314-suche-nach-passendem-bios-update-manual-acer-aspire-x3810-dt.pdf
I also know that this PCs internal hardware is the same as gateway sx2800.
I would be happy if someone could come up with a way to make this graphicscard work.
Thanks in advance.
I have a 400watt psu.
When i remove the card everything works again.
I have tried to disable internal graphics from bios and I have tried to install the supplied drivers, but nothing seems to work with this graphics card.
Acer x3810 that I have has 7 gb of ram and windows 8 and 7 dualboot.
The acer has a service manual that I found online, giving more detail about the system.
http://extreme.pcgameshardware.de/attachments/599141d1352190314-suche-nach-passendem-bios-update-manual-acer-aspire-x3810-dt.pdf
I also know that this PCs internal hardware is the same as gateway sx2800.
I would be happy if someone could come up with a way to make this graphicscard work.
Thanks in advance.
Facebook
Twitter
Instagram