reconnecting laptop screen, now laptop wont turn on!

Status
Not open for further replies.

garrettd

Reputable
Feb 19, 2014
9
0
4,510
Ive got an alienware m11x, the cable connected to the back of the screen got pulled out and bent. When I plug it back in the laptop wont turn on!

I was using it for a while with external monitors but I updated the video driver and now cant get an image on any screen.

Could a broken cable stop it from turning on? When the laptop screen is unplugged the lights and fan turn on, when plugged in nothing happens.

Any suggestions? Id be fine using externa monitors but thats nlt working anymore :/
 
Solution
all your left with is fixing the screen then.
you will need to open the bezel and the case and check to see whats broken and replace it.
sounds difficult and expensive but its not really normally this kind of repair will set you back between 20 and 60 depending on parts needed(if you do it yourself). a few screws, some very gentile persuasion and it should just pop apart. if you cant do it then its time to take it to a shop and have them fix it.

garrettd

Reputable
Feb 19, 2014
9
0
4,510
The vga is fine, the hdmi is fine.
the lcd screen conector cable is broken.

I can hear my laptop turning on but I cant get any external video to work with keyboard shortcuts. Ive tried my vga monitor and an hdtv hdmi cable :/
 
all your left with is fixing the screen then.
you will need to open the bezel and the case and check to see whats broken and replace it.
sounds difficult and expensive but its not really normally this kind of repair will set you back between 20 and 60 depending on parts needed(if you do it yourself). a few screws, some very gentile persuasion and it should just pop apart. if you cant do it then its time to take it to a shop and have them fix it.

 
Solution
Status
Not open for further replies.